Hi all,
Here are two fixes for issues I found testing with the new pyra
CPU boards.
These are against commit c8fb1e629c77 ("U-Boot: OMAP: fix variables
names in default boot environment"), I did not want to change anything
from last year while debugging this. No other patches are needed any
longer, so no need to disable the DDR internal DLL. And there is no
need to set the memory voltage to 1.5V, so please also check your
kernel dts file to remove that.
I've tested with new revision pyra C02, C03, C05 and C21. Also my
older revision pyra C50 now works.
Please test and report back if you need to increase the T_RFC value
in the second patch for some pyra board.
Regards,
Tony
Tony Lindgren (2):
LC15: Fix flakey ddr3 detection with ref_ctrl and ref_ctrl_final
LC15: Increase T_RFC to fix 4GB kernel memory errors
board/goldelico/letux-cortex15/lc15.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--
2.17.0