Hi,
Same here. I got none of these issues. The only thing I have, now, is the unit is rebooting itself. on a regular basis (says every quater or so). But since that's a new behaviour, it's either the device doesnt like the heat we currently have (I've no copper plates), the battery connection sometime fail (very likely since the battery cover broke), or any new hardware fault that this prototype is developping.
SebT3
Le mar. 3 juil. 2018 à 14:52, Nino Bock askarus@openpandora.org a écrit :
Hi,
Did not notice that any key is not working
I suppose heavy flickering means I can't miss it if I watch my unit booting up. Never noticed anything like that.
Entering suspend mode does not work AFAIR. But leaving my alone for a while does not do any harm. The screen will go blank and I automatically log out. When I press any button I'm back in the OS and can log in.
I'm using an older version of the OS. I might do a fresh reinstall for the Gamescom after my exams. Maybe it's an issue with a more recent firmware. I'm also using aTcs firmware.
Best regards Nino
On 03.07.2018 11:49, Michael Mrozek wrote:
Hi,
just a few quick questions to everyone who has a prototype. Before I file a bug, I wanted to check if others can confirm this as well.
I'm using aTc's OS.
- . - Key (the left one on the lower row) is not working. Happens with
multiple Mainboards - keymat looks fine (but I haven't changed it yet). Softwarebug?
- Sometimes, I encounter heavy flickering of the LCD. Especially
shortly after boot up. This looks like displays backlight power completely breaks down. @Nikolaus: Is there a test point where I can measure the power that arrives at the display board? Or is this a software bug?
- As soon as the Pyra enters a bit of powersaving mode (switching off
the backlight of the LCD), it freezes. Not sure if it only blanks the display or does something else, but it looks like something freezes when entering a low-power state.
Kernel mailing list Kernel@pyra-handheld.com http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel