This is an attempt to define a schema for the bq24296/7 charger and power supply controllers with battery monitoring and OTG booster.

We model it as a dual regulator because it can generate a VSYS (with controllable voltage) and optionally an OTG voltage either from the battery or from external power supply.

This scheme works well with e.g. the dwc3 setup of the OMAP5 to turn on OTG regulator on demand.

The DT should provide a reference to a monitored battery description so that initial and operation parameters of the battery can be specified to control the charger parameters.

To support different initial charging current for USB and AC charger mode, an optional gpio should be provided that the driver can use to set defaults.

A driver is available and working for several years, but the bindings should be clarified first.

The example shows what we are successfully using for the working system.

Since the omap5 Pyra Handheld is not yet in the DTS tree, there would be no explicit user of this driver. So the plan is to submit a full patch set for the Pyra later.

Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- .../bindings/power/supply/bq2429x.yaml | 122 ++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/bq2429x.yaml

diff --git a/Documentation/devicetree/bindings/power/supply/bq2429x.yaml b/Documentation/devicetree/bindings/power/supply/bq2429x.yaml new file mode 100644 index 000000000000..1b31ece4026e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2429x.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq2429x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI bq24296/24297 and MPS MP2624 Li-Ion Charger with OTG booster + +maintainers: + - H. Nikolaus Schaller hns@goldelico.com + +description: |+ + This binding will support the bq24296 and bq24297. + There are other ICs in the same family but those have + not been addressed. + The MP2624 is very similar to the bq24297 but not exactly + identical. + This chip is used by the OMAP5 based Pyra-Handheld. + +properties: + compatible: + oneOf: + - const: mps,mp2624 + - const: ti,bq24296 + - const: ti,bq24297 + + reg: + const: 0x6b + + interrupts: + minItems: 1 + + monitored-battery: + - description: phandle to the battery node + - allOf: + - $ref: /schemas/types.yaml#/definitions/phandle +# QUESTION : how can we correctly describe that we support only the following phandle properties and ignore the others? + - enum: + - voltage-max-design-microvolt: + - default: 4200000 + - voltage-min-design-microvolt: + - default: 3200000 + - constant-charge-current-max-microamp: + - default: as defined by boot loader + - precharge-current-microamp: + - default: 128000 + - charge-term-current-microamp: + - default: 128000 + + regulators: + minItems: 2 + maxItems: 2 + items: +# QUESTION: can we specify that these are to be regulator nodes? + - description: | + two regulator child nodes for + [0] vsys (battery or usb input -> system output) + [1] otg (battery input -> usb output). + + dc-det-gpios: + items: +# QUESTION: how do we specify that it should be a gpio? + - description: gpio for detecting two different DC sources + - default: use usb-input-current-microamp only + + ti,usb-input-current-microamp: + items: + - description: initial current for USB source (if dc-det is 0) + - default: value as defined by boot loader + + ti,adp-input-current-microamp: + items: + - description: initial current for other source (if dc-det is 1) + - default: 2048000µA + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + bat: battery { + compatible = "simple-battery", "pyra-battery"; + voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; + energy-full-design-microwatt-hours = <22200000>; + charge-full-design-microamp-hours = <6000000>; + charge-term-current-microamp = <128000>; + constant-charge-current-max-microamp = <1000000>; + }; + + bq24297@6b { + compatible = "ti,bq24297"; + reg = <0x6b>; + monitored-battery = <&bat>; + interrupt-parent = <&gpio99>; + interrupts = <(1*8+3) IRQ_TYPE_EDGE_FALLING>; /* P13 */ + regulators { + vsys_reg: vsys_regulator { + regulator-compatible = "bq2429x-vsys"; + regulator-name = "vsys"; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + otg_reg: otg_regulator { + regulator-compatible = "bq2429x-otg"; + regulator-name = "otg"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <5100000>; + }; + }; + }; + +...