KVERSION: 5.4-rc3 CONFIGS: arch/arm/configs/letux_defconfig arch/arm/configs/letux_lpae_defconfig arch/mips/configs/letux_defconfig

Infos ===== Project Home: http://projects.goldelico.com/p/gta04-kernel/ Issues: http://projects.goldelico.com/p/gta04-kernel/issues/

Downloads ========= git: http://git.goldelico.com/?p=letux-kernel.git;a=shortlog;h=refs/heads/letux-5... ARM: http://download.goldelico.com/letux-kernel/letux-5.4-rc3 ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.4-rc3-lpae MIPS: http://download.goldelico.com/letux-kernel/letux-5.4-rc3-l400

recent CHANGES (http://download.goldelico.com/letux-kernel/letux-5.4-rc3/src/CHANGES) ============== letux-5.4-rc3 Fri Oct 18 16:05:46 CEST 2019: * streamline and improve bq2429x driver * fixes for jz4730 * improve sgxdemo to install user-space libs if needed * split sgx glue code into patch set by others which is already/almost in linux-next and our own work * make pandora wl1251 to have stable wlan interface numbers by fixing DT handling * fix some iisues in sgx DT nodes * improve sgxdump * integrate latest rstctl, sysctl etc. patches for SGX * fix pandora sdio / wl1251 detection and firmware load * fix gta04 and openpandora spi panels

letux-5.4-rc2 Mo 7 Okt 2019 19:11:52 CEST: * fix for sgxdump to better detect/handle omap3430 and omap3630 (and others) * Letux/rootfs: add ip-forwarding.sh script to setup host where a LetuxOS device is connected to * apply upstream fix for boot issue (__always_inlineand OPTIMIZE_FOR_SIZE) * fix for Letux 3704/Letux 7004 panel (display timing in DTS)

letux-5.4-rc1 Mi 2 Okt 2019 16:20:48 CEST: !!! does not completely boot on GTA04. Other platforms untested. * compile fixes for sortextable on Darwin, extcon-gpio * fixes merge conflicts in: letux/tsc2007-v11, letux/iio-mount-matrix-v3, letux/panels+ssd2858-v2 (panels moved to drivers/gpu/drm/panel), letux/omap-pvr-soc-glue-v3, letux/latest-pvr, letux/omap-pvr, letux/am335x-hwmon, letux/jz4730 (code likely broken now), letux/extcon-v2, letux/pyra-minimal * letux/omap-pvr-soc-glue-v3: fixes to make omap4 version (almost) work (Pandaboard) * pandora device tree and omap_hsmmc + mach-omap2/pdata-quirks: add (still incomplete) fix for Pandora WiFi * Letux/rootfs: charger: increase twl4030 charging current on AC port (Pandora) * letux/omap-pvr-soc-glue-v3: include latest sysc and reset-controller patches from linux-next and https://github.com/t-kristo/linux-pm.git * Letux/rootfs: update sgxdump and rename gpu-demo to sgxdemo * Letux/rootfs: new method to detect panel and set up xorg.conf * letux/vcnl4000: change to use SELFTIMED for vcnl4010 * reinstall "libertas: disable pm_ops" otherwise we have 200mA on GTA04 in suspend

letux-5.3 Mo 16 Sep 2019 07:39:33 CEST: * revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware." * add some new RasPi 3B+ defconfigs * letux/omap3-opp-v4: properly control omap36xx ABB LDO for OPP1G * letux/omap3-opp-v4: do thermal management (limit TJ to 90°C) * RasPi: setup gpio3 as KEY_POWER * RasPi: build drivers for WLAN * configure for CONFIG_CRYPTO_DEV_OMAP * fix DTS for Letux3704 and Letux7004 to handle panel backlight * twl4030_charger: handle negative current_now * Letux: rootfs: temperatures: also find cpu-thermal on RasPi

letux-5.1-next, letux-5.2-next: * revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware." * add some new RasPi 3B+ defconfigs

letux-5.3-rc8: * pyra-mainboard: invert lid sensor polarity * letux/omap-pvr-soc-glue-v2: update to add proper sgx child nodes - works on Pyra * letux/omap3-opp-v3: some updates by discussions on LKML * mergefile: merge letux/omap3-opp * letux/rootfs: make volumd do better checks; fix systemd config to use letux-panel-setup.service instead of tiler.service to make display work with Debian Stretch

letux-4.19-next, letux-5.2-next: * pyra-mainboard: invert lid sensor polarity

letux-5.3-rc7: * letux/omap2plus: clean up "Strange things happening with latest kernels" * letux/omap3-opp-v2: new branch (not merged) with work in progress to support omap3 720MHz/1GHz OPPs * letux/omap-sgx-glue: new branch (not merged) with new SOC glue for SGX from Tony

letux-5.3-rc6: * letux/omap2plus: added "gpio: of: fix Freescale SPI CS quirk handling" to make GTA04 panel work again * letux/omap2plus: added "regulator: twl: voltage lists for vdd1/2 on twl4030"

letux-5.3-rc5: * letux/latest-pvr: made SGX DDK1.14 working on 5.3-rc (at least as LPAE build for OMAP5)

letux-4.19-next, letux-5.2-next: * letux/latest-pvr: add latest SGX DDK1.14 driver and made working (at least as LPAE build for OMAP5)

letux-5.3-rc4: * hack to revert "arm: use swiotlb for bounce buffering on LPAE configs" because it breaks omapdrm in LPAE compile * letux/rootfs: new tool mount-boot * letux/tiler: fixes for omap5 tiler (but still only working for 0°) * letux/rootfs: switch /e/n/i to a better DNS server * letux/latest-pvr: fix make clean for PVR/SGX * letux/latest-pvr: work on Makefile so that we can build DDK1.14 for DRM

=== more cut off ===