[PATCH v2] net: davicom: dm9000: allow to pass MAC address through mac_addr module parameter
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address.
This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time.
So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config.
To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; }
+static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address"); + +static void get_mac_addr(struct net_device *ndev, char *macaddr) +{ + int i = 0; + int j = 0; + int got_num = 0; + int num = 0; + + while (j < ETH_ALEN) { + if (macaddr[i]) { + int digit; + + got_num = 1; + digit = hex_to_bin(macaddr[i]); + if (digit >= 0) + num = num * 16 + digit; + else if (':' == macaddr[i]) + got_num = 2; + else + break; + } else if (got_num) { + got_num = 2; + } else { + break; + } + if (got_num == 2) { + ndev->dev_addr[j++] = (u8)num; + num = 0; + got_num = 0; + } + i++; + } +} + /* * Search DM9000 board, allocate space and register it */ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
+ if (!is_valid_ether_addr(ndev->dev_addr)) { + mac_src = "param"; + get_mac_addr(ndev, mac_addr); + } + if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
On Fri, Feb 14, 2020 at 05:07:35PM +0100, H. Nikolaus Schaller wrote:
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address.
I think this will get ACKed.
There is a well defined way to pass the MAC address via DT. The driver supports that already.
uboot for this board appears to be open:
https://github.com/MIPS/CI20_u-boot
and it is documented to how build it.
So there is no reason why it cannot be made to support the standard mechanism.
Andrew
From: "H. Nikolaus Schaller" hns@goldelico.com Date: Fri, 14 Feb 2020 17:07:35 +0100
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address.
This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time.
So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config.
To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Sorry, this is not appropriate. Module parameters in networking drivers never are.
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address.
This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time.
So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config.
To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; }
+static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
Am 14.02.2020 um 19:47 schrieb Paul Cercueil paul@crapouillou.net:
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
Interesting approach. I have found this:
https://lore.kernel.org/patchwork/patch/868158/
but it looks as if it was never finished (I could not locate a V3 or anything mainline?) and and it tries to solve other problems as well.
And it looks to be much more complex than my "solution" to the immediate problem.
I have to study it to know if I can write a nvmem_get_mac_address().
BR, Nikolaus
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address. This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time. So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config. To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality. Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; } +static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
Am 14.02.2020 um 20:24 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 19:47 schrieb Paul Cercueil paul@crapouillou.net:
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
Interesting approach. I have found this:
https://lore.kernel.org/patchwork/patch/868158/
but it looks as if it was never finished (I could not locate a V3 or anything mainline?) and and it tries to solve other problems as well.
And it looks to be much more complex than my "solution" to the immediate problem.
I have to study it to know if I can write a nvmem_get_mac_address().
Another question is how to link this very jz4780 specific code to the generic davicom dm9000 driver? And where should the new code live. In some jz4780 specific file or elsewhere?
BR, Nikolaus
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address. This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time. So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config. To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality. Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; } +static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
Le ven., févr. 14, 2020 at 20:38, H. Nikolaus Schaller hns@goldelico.com a écrit :
Am 14.02.2020 um 20:24 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 19:47 schrieb Paul Cercueil paul@crapouillou.net:
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
Interesting approach. I have found this:
https://lore.kernel.org/patchwork/patch/868158/
but it looks as if it was never finished (I could not locate a V3 or anything mainline?) and and it tries to solve other problems as well.
Yes, I think it's a bit too complex - it's probably fine to just read chunks of 4 bytes.
And it looks to be much more complex than my "solution" to the immediate problem.
Yes, a proper fix usually means more work ;)
I have to study it to know if I can write a nvmem_get_mac_address().
Another question is how to link this very jz4780 specific code to the generic davicom dm9000 driver? And where should the new code live. In some jz4780 specific file or elsewhere?
In the dm9000's devicetree node you'd have a "mac-address = <&mac_addr>;". The "mac-address" is already a standard property, and the davicom driver already supports it.
The "mac_addr" should be a pointer to the efuse cell that corresponds to the MAC address. See the examples at the bottom of Documentation/devicetree/bindings/nvmem/nvmem.yaml and Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml.
-Paul
BR, Nikolaus
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address. This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time. So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config. To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality. Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; } +static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
Am 14.02.2020 um 20:38 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 20:24 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 19:47 schrieb Paul Cercueil paul@crapouillou.net:
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
Interesting approach. I have found this:
https://lore.kernel.org/patchwork/patch/868158/
but it looks as if it was never finished (I could not locate a V3 or anything mainline?) and and it tries to solve other problems as well.
And it looks to be much more complex than my "solution" to the immediate problem.
I have to study it to know if I can write a nvmem_get_mac_address().
Another question is how to link this very jz4780 specific code to the generic davicom dm9000 driver? And where should the new code live. In some jz4780 specific file or elsewhere?
Ok, got it.
nvmem_get_mac_address() is looking for a nvmem cell "mac-address".
So some jz4780 specific driver must provide such cells.
There aren't many examples but it appears as if arch/arm/mach-davinci/board-da830-evm.c defines and registers nvmem cells.
But maybe it is not difficult to teach the 2018 driver to provide such cells.
BR and thanks, Nikolaus
BR, Nikolaus
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address. This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time. So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config. To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality. Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; } +static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
Le ven., févr. 14, 2020 at 21:05, H. Nikolaus Schaller hns@goldelico.com a écrit :
Am 14.02.2020 um 20:38 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 20:24 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 14.02.2020 um 19:47 schrieb Paul Cercueil paul@crapouillou.net:
Hi Nikolaus,
What I'd suggest is to write a NVMEM driver for the efuse and retrieve the MAC address cleanly with nvmem_get_mac_address().
It shouldn't be hard to do (there's already code for it in the non-upstream 3.18 kernel for the CI20) and you remove the dependency on uboot.
Interesting approach. I have found this:
https://lore.kernel.org/patchwork/patch/868158/
but it looks as if it was never finished (I could not locate a V3 or anything mainline?) and and it tries to solve other problems as well.
And it looks to be much more complex than my "solution" to the immediate problem.
I have to study it to know if I can write a nvmem_get_mac_address().
Another question is how to link this very jz4780 specific code to the generic davicom dm9000 driver? And where should the new code live. In some jz4780 specific file or elsewhere?
Ok, got it.
nvmem_get_mac_address() is looking for a nvmem cell "mac-address".
So some jz4780 specific driver must provide such cells.
No, the jz4780 specific driver should just provide the functionality.
The cells are provided in devicetree, just like in the two documentation files I listed before.
-Paul
There aren't many examples but it appears as if arch/arm/mach-davinci/board-da830-evm.c defines and registers nvmem cells.
But maybe it is not difficult to teach the 2018 driver to provide such cells.
BR and thanks, Nikolaus
BR, Nikolaus
-Paul
Le ven., févr. 14, 2020 at 17:07, H. Nikolaus Schaller hns@goldelico.com a écrit :
The MIPS Ingenic CI20 board is shipped with a quite old u-boot (ci20-v2013.10 see https://elinux.org/CI20_Dev_Zone). This passes the MAC address through dm9000.mac_addr=xx:xx:xx:xx:xx:xx kernel module parameter to give the board a fixed MAC address. This is not processed by the dm9000 driver which assigns a random MAC address on each boot, making DHCP assign a new IP address each time. So we add a check for the mac_addr module parameter as a last resort before assigning a random one. This mechanism can also be used outside of u-boot to provide a value through modprobe config. To parse the MAC address in a new function get_mac_addr() we use an copy adapted from the ksz884x.c driver which provides the same functionality. Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
drivers/net/ethernet/davicom/dm9000.c | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1ea3372775e6..7402030b0352 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1409,6 +1409,43 @@ static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) return pdata; } +static char *mac_addr = ":"; +module_param(mac_addr, charp, 0); +MODULE_PARM_DESC(mac_addr, "MAC address");
+static void get_mac_addr(struct net_device *ndev, char *macaddr) +{
- int i = 0;
- int j = 0;
- int got_num = 0;
- int num = 0;
- while (j < ETH_ALEN) {
if (macaddr[i]) {int digit;got_num = 1;digit = hex_to_bin(macaddr[i]);if (digit >= 0)num = num * 16 + digit;else if (':' == macaddr[i])got_num = 2;elsebreak;} else if (got_num) {got_num = 2;} else {break;}if (got_num == 2) {ndev->dev_addr[j++] = (u8)num;num = 0;got_num = 0;}i++;- }
+}
/*
- Search DM9000 board, allocate space and register it
*/ @@ -1679,6 +1716,11 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); }
- if (!is_valid_ether_addr(ndev->dev_addr)) {
mac_src = "param";get_mac_addr(ndev, mac_addr);- }
- if (!is_valid_ether_addr(ndev->dev_addr)) { inv_mac_addr = true; eth_hw_addr_random(ndev);
-- 2.23.0
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
-
Andrew Lunn -
David Miller -
H. Nikolaus Schaller -
Paul Cercueil