[PATCH v7 0/9] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
Changes V7: * rearranged the include files (asked for by Jonathan Cameron jic23@kernel.org) * forward reference struct iio_dev * instead of condition in tsc2007.h (asked for by Jonathan Cameron jic23@kernel.org) * add some Acked-by:
2016-10-27 10:44:29: Changes V6: * iio patch (no changes elsewhere) - tsc2007_iio: fix a missing return 0 for non-iio case (found by kbuid test robot) - tsc2007_core: group error return paths so that tsc2007_iio_unconfigure is called at only one place - tsc2007_iio: fix copyright (this file is 100% original work)
2016-10-25 21:26:46: Changes V5: * ads7846: remove an empty line (suggested by Andrew F. Davis afd@ti.com) * ads7846: remove MODULE_ALIAS for SPI (suggested by Andrew F. Davis afd@ti.com) * tsc2007: fix a bug from swapping patch 3/n and patch 4/n (found by kbuild test robot) * refactored tsc2007 into tsc2007_core and tsc2007_iio (asked for by Jonathan Cameron jic23@kernel.org)
2016-10-17 16:00:02: Changes V4: * fix a merge/squash issue resulting in a non-bisectable patch set (suggested by kbuid test robot) * remove some unnecessary #include (suggested by Jonathan Cameron jic23@kernel.org) * make the iio extension depend on CONFIG_IIO rather than selecting it (suggested by Jonathan Cameron jic23@kernel.org) * swapped patch 3/n and patch 4/n to remove internal dependency
2016-09-23 14:41:23: Changes V3: * fix an issue with swapping * remove hard clipping to min/max rectangle - some systems expect to handle negative coordinates * make use of commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes")
2015-11-13 21:36:07: Changes V2: * add a patch to make drivers still recognise the old "ti,swap-xy" property (suggested by Rob Herring)
2015-11-06 16:14:53: This patch series improves the drivers for the tsc2007 and ads7846/tsc2046 touchscreen controllers which are e.g. used by the GTA04 OpenPandora and Pyra devices.
New common bindings have been defined by commit b98abe52fa8e ("Input: add common DT binding for touchscreens"):
Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
which also defines a helper function to parse the DT. These new parameters allow to specify the fuzz factors (jitter suppression), inversion of x or y axis and swapping of x and y to achieve inversion and rotation so that the touch coordinate axes match the natural orientation of the display panel.
Another improvement is to better use the min/max ADC values and scale to the screen size as defined by the DT. This allows to coarsely calibrate the touch to match the LCD to which it is glued on so that the touch can quite precisely be operated before any user-space fine-calibration can be (and needs to be) started.
For the adc7846 we fix an issue with the spi module table.
Finally we add an iio interface for the AUX and temperature ADC channels of the tsc2007 and also provide the touch screen raw values. This allows to read an optional ambient light sensor installed on the gta04 board and improves calibration and hardware monitoring.
H. Nikolaus Schaller (9): drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does drivers:input:tsc2007: check for presence and power down tsc2007 during probe drivers:input:tsc2007: add iio interface to read external ADC input and temperature DT:omap3+tsc2007: use new common touchscreen bindings drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping dt-bindings: input: move ads7846 bindings to touchscreen subdirectory drivers:input:ads7846(+tsc2046): fix spi module table DT:omap3+ads7846: use new common touchscreen bindings
.../bindings/input/{ => touchscreen}/ads7846.txt | 9 +- .../bindings/input/touchscreen/tsc2007.txt | 20 +- arch/arm/boot/dts/omap3-gta04.dtsi | 25 ++- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 17 +- .../boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 3 +- drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/ads7846.c | 71 +++++-- drivers/input/touchscreen/tsc2007.h | 118 +++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 236 +++++++++++++-------- drivers/input/touchscreen/tsc2007_iio.c | 152 +++++++++++++ include/linux/i2c/tsc2007.h | 8 + 12 files changed, 541 insertions(+), 122 deletions(-) rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (90%) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (70%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
commit b98abe52fa8e ("Input: add common DT binding for touchscreens") introduced common DT bindings for touchscreens [1] and a helper function to parse the DT.
commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes") added another helper for parsing axis inversion and swapping and applying them to x and y coordinates.
Both helpers have been integrated to accommodate any orientation of the touch panel in relation to the LCD.
A new feature is to introduce scaling the min/max ADC values to the screen size.
This makes it possible to pre-calibrate the touch so that is (almost) exactly matches the LCD pixel coordinates it is glued onto. This allows to well enough operate the touch before a user space calibration step can improve the precision.
Please note that the old ti,fuzz properties have been removed since they are replaced by the common bindings touchscreen-fuzz-x/y/z.
Finally, calculate_pressure has been renamed to calculate_resistance because that is what it is doing.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- .../bindings/input/touchscreen/tsc2007.txt | 20 ++-- drivers/input/touchscreen/tsc2007.c | 120 +++++++++++++++++---- include/linux/i2c/tsc2007.h | 8 ++ 3 files changed, 118 insertions(+), 30 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt index ec365e1..6e9fd55 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -6,6 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms.
Optional properties: +- generic touch screen properties: see touchscreen binding [2]. - gpios: the interrupt gpio the chip is connected to (trough the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). @@ -13,17 +14,20 @@ Optional properties: (see interrupt binding[0]). - interrupts: (gpio) interrupt to which the chip is connected (see interrupt binding[0]). -- ti,max-rt: maximum pressure. -- ti,fuzzx: specifies the absolute input fuzz x value. - If set, it will permit noise in the data up to +- the value given to the fuzz - parameter, that is used to filter noise from the event stream. -- ti,fuzzy: specifies the absolute input fuzz y value. -- ti,fuzzz: specifies the absolute input fuzz z value. +- ti,max-rt: maximum pressure resistance above which samples are ignored + (default: 4095). +- ti,report-resistance: report resistance (no pressure = max_rt) instead + of pressure (no pressure = 0). +- ti,min-x: minimum value reported by X axis ADC (default 0). +- ti,max-x: maximum value reported by X axis ADC (default 4095). +- ti,min-y: minimum value reported by Y axis ADC (default 0). +- ti,max-y: maximum value reported by Y axis ADC (default 4095). - ti,poll-period: how much time to wait (in milliseconds) before reading again the - values from the tsc2007. + values from the tsc2007 (default 1).
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/gpio/gpio.txt +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Example: &i2c1 { @@ -35,6 +39,8 @@ Example: interrupts = <0x0 0x8>; gpios = <&gpio4 0 0>; ti,x-plate-ohms = <180>; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; };
/* ... */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 5d0cd51..c1d9593 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -29,6 +29,7 @@ #include <linux/of_device.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/input/touchscreen.h>
#define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) @@ -74,6 +75,14 @@ struct tsc2007 {
u16 model; u16 x_plate_ohms; + + struct touchscreen_properties prop; + + bool report_resistance; + u16 min_x; + u16 min_y; + u16 max_x; + u16 max_y; u16 max_rt; unsigned long poll_period; /* in jiffies */ int fuzzx; @@ -128,7 +137,8 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) +static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, + struct ts_event *tc) { u32 rt = 0;
@@ -177,12 +187,13 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) struct ts_event tc; u32 rt;
+ dev_dbg(&ts->client->dev, "soft irq %d\n", irq); while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */ tsc2007_read_values(ts, &tc);
- rt = tsc2007_calculate_pressure(ts, &tc); + rt = tsc2007_calculate_resistance(ts, &tc);
if (!rt && !ts->get_pendown_state) { /* @@ -194,21 +205,41 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) }
if (rt <= ts->max_rt) { + int sx, sy; + dev_dbg(&ts->client->dev, "DOWN point(%4d,%4d), pressure (%4u)\n", tc.x, tc.y, rt);
+ if (!ts->report_resistance) + rt = ts->max_rt - rt; + + /* scale ADC values to desired output range */ + sx = (ts->prop.max_x * (tc.x - ts->min_x)) + / (ts->max_x - ts->min_x); + sy = (ts->prop.max_y * (tc.y - ts->min_y)) + / (ts->max_y - ts->min_y); + rt = (input->absinfo[ABS_PRESSURE].maximum * rt) / + ts->max_rt; + + dev_dbg(&ts->client->dev, + "Scaled point(%4d,%4d), pressure (%4u)\n", + sx, sy, rt); + + /* report event */ input_report_key(input, BTN_TOUCH, 1); - input_report_abs(input, ABS_X, tc.x); - input_report_abs(input, ABS_Y, tc.y); + touchscreen_report_pos(ts->input, &ts->prop, + (unsigned int) sx, + (unsigned int) sy, + false); input_report_abs(input, ABS_PRESSURE, rt);
input_sync(input);
} else { /* - * Sample found inconsistent by debouncing or pressure is - * beyond the maximum. Don't report it to user space, + * Sample found inconsistent by debouncing or resistance + * is beyond the maximum. Don't report it to user space, * repeat at least once more the measurement. */ dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); @@ -233,6 +264,7 @@ static irqreturn_t tsc2007_hard_irq(int irq, void *handle) { struct tsc2007 *ts = handle;
+ dev_dbg(&ts->client->dev, "hard irq %d\n", irq); if (tsc2007_is_pen_down(ts)) return IRQ_WAKE_THREAD;
@@ -303,14 +335,24 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) else ts->max_rt = MAX_12BIT;
- if (!of_property_read_u32(np, "ti,fuzzx", &val32)) - ts->fuzzx = val32; + ts->report_resistance = + of_property_read_bool(np, "ti,report-resistance");
- if (!of_property_read_u32(np, "ti,fuzzy", &val32)) - ts->fuzzy = val32; + touchscreen_parse_properties(ts->input, false, &ts->prop);
- if (!of_property_read_u32(np, "ti,fuzzz", &val32)) - ts->fuzzz = val32; + if (!of_property_read_u32(np, "ti,min-x", &val32)) + ts->min_x = val32; + if (!of_property_read_u32(np, "ti,max-x", &val32)) + ts->max_x = val32; + else + ts->max_x = MAX_12BIT; + + if (!of_property_read_u32(np, "ti,min-y", &val32)) + ts->min_y = val32; + if (!of_property_read_u32(np, "ti,max-y", &val32)) + ts->max_y = val32; + else + ts->max_y = MAX_12BIT;
if (!of_property_read_u64(np, "ti,poll-period", &val64)) ts->poll_period = msecs_to_jiffies(val64); @@ -332,6 +374,22 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) "GPIO not specified in DT (of_get_gpio returned %d)\n", ts->gpio);
+ dev_dbg(&client->dev, + "min/max_x (%4d,%4d)\n", + ts->min_x, ts->max_x); + dev_dbg(&client->dev, + "min/max_y (%4d,%4d)\n", + ts->min_y, ts->max_y); + dev_dbg(&client->dev, + "max_rt (%4d)\n", + ts->max_rt); + dev_dbg(&client->dev, + "size (%4d,%4d)\n", + ts->prop.max_x, ts->prop.max_y); + dev_dbg(&client->dev, + "ts-gpio: %d\n", + ts->gpio); + return 0; } #else @@ -349,6 +407,14 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->max_rt = pdata->max_rt ? : MAX_12BIT; + ts->prop.swap_x_y = pdata->swap_xy; + ts->prop.invert_x = pdata->invert_x; + ts->prop.invert_y = pdata->invert_y; + ts->report_resistance = pdata->report_resistance; + ts->min_x = pdata->min_x ? : 0; + ts->min_y = pdata->min_y ? : 0; + ts->max_x = pdata->max_x ? : MAX_12BIT; + ts->max_y = pdata->max_y ? : MAX_12BIT; ts->poll_period = msecs_to_jiffies(pdata->poll_period ? : 1); ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; @@ -388,13 +454,6 @@ static int tsc2007_probe(struct i2c_client *client, if (!ts) return -ENOMEM;
- if (pdata) - err = tsc2007_probe_pdev(client, ts, pdata, id); - else - err = tsc2007_probe_dt(client, ts); - if (err) - return err; - input_dev = devm_input_allocate_device(&client->dev); if (!input_dev) return -ENOMEM; @@ -419,12 +478,25 @@ static int tsc2007_probe(struct i2c_client *client, input_set_drvdata(input_dev, ts);
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | + BIT_MASK(ABS_PRESSURE); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0); - input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, - ts->fuzzz, 0); + if (pdata) { + err = tsc2007_probe_pdev(client, ts, pdata, id); + if (err) + return err; + input_set_abs_params(input_dev, ABS_X, 0, ts->max_x-ts->min_x, + ts->fuzzx, 0); + input_set_abs_params(input_dev, ABS_Y, 0, ts->max_y-ts->min_y, + ts->fuzzy, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, ts->max_rt, + ts->fuzzz, 0); + } else { + err = tsc2007_probe_dt(client, ts); + if (err) + return err; + }
if (pdata) { if (pdata->exit_platform_hw) { @@ -443,6 +515,8 @@ static int tsc2007_probe(struct i2c_client *client, pdata->init_platform_hw(); }
+ dev_dbg(&client->dev, "request irq %d\n", + ts->irq); err = devm_request_threaded_irq(&client->dev, ts->irq, tsc2007_hard_irq, tsc2007_soft_irq, IRQF_ONESHOT, diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index 4f35b6a..632db20 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -6,6 +6,14 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ u16 x_plate_ohms; /* must be non-zero value */ + bool swap_xy; /* swap x and y axis */ + bool invert_x; + bool invert_y; + bool report_resistance; + u16 min_x; /* min and max values reported by ADC */ + u16 min_y; + u16 max_x; + u16 max_y; u16 max_rt; /* max. resistance above which samples are ignored */ unsigned long poll_period; /* time (in ms) between samples */ int fuzzx; /* fuzz factor for X, Y and pressure axes */
this should reduce unnecessary input events.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/input/touchscreen/tsc2007.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index c1d9593..e9d5086 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -94,6 +94,7 @@ struct tsc2007 {
wait_queue_head_t wait; bool stopped; + bool pendown;
int (*get_pendown_state)(struct device *); void (*clear_penirq)(void); @@ -227,7 +228,11 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) sx, sy, rt);
/* report event */ - input_report_key(input, BTN_TOUCH, 1); + if (!ts->pendown) { + input_report_key(input, BTN_TOUCH, 1); + ts->pendown = true; + } + touchscreen_report_pos(ts->input, &ts->prop, (unsigned int) sx, (unsigned int) sy, @@ -250,9 +255,13 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
dev_dbg(&ts->client->dev, "UP\n");
- input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_sync(input); + if (ts->pendown) { + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); + + ts->pendown = false; + }
if (ts->clear_penirq) ts->clear_penirq();
1. check if chip is really present and don't succeed if it isn't. 2. if it succeeds, power down the chip until accessed
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/input/touchscreen/tsc2007.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index e9d5086..5e3c4bf 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -538,6 +538,14 @@ static int tsc2007_probe(struct i2c_client *client,
tsc2007_stop(ts);
+ /* power down the chip (TSC2007_SETUP does not ACK on I2C) */ + err = tsc2007_xfer(ts, PWRDOWN); + if (err < 0) { + dev_err(&client->dev, + "Failed to setup chip: %d\n", err); + return err; /* usually, chip does not respond */ + } + err = input_register_device(input_dev); if (err) { dev_err(&client->dev,
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 118 ++++++++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 119 ++++++---------- drivers/input/touchscreen/tsc2007_iio.c | 152 +++++++++++++++++++++ 4 files changed, 310 insertions(+), 81 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (85%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..d932e2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 0000000..5049bf8 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,118 @@ +/* + * drivers/input/touchscreen/tsc2007.h + * + * Copyright (c) 2008 MtekVision Co., Ltd. + * Kwangwoo Lee kwlee@mtekvision.com + * + * Using code from: + * - ads7846.c + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/input/touchscreen.h> + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { + u16 x; + u16 y; + u16 z1, z2; +}; + +struct tsc2007 { + struct input_dev *input; + char phys[32]; + + struct i2c_client *client; + + u16 model; + u16 x_plate_ohms; + + struct touchscreen_properties prop; + + bool report_resistance; + u16 min_x; + u16 min_y; + u16 max_x; + u16 max_y; + u16 max_rt; + unsigned long poll_period; /* in jiffies */ + int fuzzx; + int fuzzy; + int fuzzz; + + unsigned int gpio; + int irq; + + wait_queue_head_t wait; + bool stopped; + bool pendown; + + int (*get_pendown_state)(struct device *); + void (*clear_penirq)(void); + + struct mutex mlock; + struct iio_dev *iio_dev; /* optional */ +}; + +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, + struct ts_event *tc); +bool tsc2007_is_pen_down(struct tsc2007 *ts); + +#ifdef CONFIG_IIO + +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts); + +#else /* CONFIG_IIO */ + +static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{ + return 0; +} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +} + +#endif /* CONFIG_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c similarity index 85% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 5e3c4bf..72775ae 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,80 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { - u16 x; - u16 y; - u16 z1, z2; -}; - -struct tsc2007 { - struct input_dev *input; - char phys[32]; - - struct i2c_client *client; - - u16 model; - u16 x_plate_ohms; - - struct touchscreen_properties prop; - - bool report_resistance; - u16 min_x; - u16 min_y; - u16 max_x; - u16 max_y; - u16 max_rt; - unsigned long poll_period; /* in jiffies */ - int fuzzx; - int fuzzy; - int fuzzz; +#include "tsc2007.h"
- unsigned gpio; - int irq; - - wait_queue_head_t wait; - bool stopped; - bool pendown; - - int (*get_pendown_state)(struct device *); - void (*clear_penirq)(void); -}; - -static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
return val; } +EXPORT_SYMBOL(tsc2007_xfer);
static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) { @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
return rt; } +EXPORT_SYMBOL(tsc2007_calculate_resistance);
-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007 *ts)
return ts->get_pendown_state(&ts->client->dev); } +EXPORT_SYMBOL(tsc2007_is_pen_down);
static irqreturn_t tsc2007_soft_irq(int irq, void *handle) { @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */ + + mutex_lock(&ts->mlock); tsc2007_read_values(ts, &tc); + mutex_unlock(&ts->mlock);
rt = tsc2007_calculate_resistance(ts, &tc);
@@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev); + const struct tsc2007_platform_data *pdata = + dev_get_platdata(&client->dev); struct tsc2007 *ts; struct input_dev *input_dev; int err; @@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; + + err = tsc2007_iio_configure(ts); + if (err < 0) + return err; + init_waitqueue_head(&ts->wait); + mutex_init(&ts->mlock);
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); @@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client *client, if (pdata) { err = tsc2007_probe_pdev(client, ts, pdata, id); if (err) - return err; + goto probe_err; input_set_abs_params(input_dev, ABS_X, 0, ts->max_x-ts->min_x, ts->fuzzx, 0); input_set_abs_params(input_dev, ABS_Y, 0, ts->max_y-ts->min_y, @@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client *client, } else { err = tsc2007_probe_dt(client, ts); if (err) - return err; + goto probe_err; }
if (pdata) { @@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client *client, dev_err(&client->dev, "Failed to register exit_platform_hw action, %d\n", err); - return err; + goto probe_err; } }
@@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "Failed to request irq %d: %d\n", ts->irq, err); - return err; + goto probe_err; }
tsc2007_stop(ts); @@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client *client, if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err); - return err; /* usually, chip does not respond */ + goto probe_err; /* chip does not respond */ }
err = input_register_device(input_dev); if (err) { dev_err(&client->dev, "Failed to register input device: %d\n", err); - return err; + goto probe_err; }
return 0; + +probe_err: + tsc2007_iio_unconfigure(ts); + return err; +} + +static int tsc2007_remove(struct i2c_client *client) +{ + struct tsc2007 *ts = i2c_get_clientdata(client); + + tsc2007_iio_unconfigure(ts); + input_unregister_device(ts->input); + return 0; }
static const struct i2c_device_id tsc2007_idtable[] = { @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, + .remove = tsc2007_remove, };
module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 0000000..e492bba --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,152 @@ +/* + * drivers/input/touchscreen/tsc2007_iio.c + * + * Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG + * Nikolaus Schaller hns@goldelico.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { + struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { + TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */ + TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct tsc2007_iio *iio = iio_priv(indio_dev); + struct tsc2007 *tsc = iio->ts; + int adc_chan = chan->channel; + int ret = 0; + + if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel)) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + mutex_lock(&tsc->mlock); + + switch (chan->channel) { + case 0: + *val = tsc2007_xfer(tsc, READ_X); + break; + case 1: + *val = tsc2007_xfer(tsc, READ_Y); + break; + case 2: + *val = tsc2007_xfer(tsc, READ_Z1); + break; + case 3: + *val = tsc2007_xfer(tsc, READ_Z2); + break; + case 4: + *val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX)); + break; + case 5: { + struct ts_event tc; + + tc.x = tsc2007_xfer(tsc, READ_X); + tc.z1 = tsc2007_xfer(tsc, READ_Z1); + tc.z2 = tsc2007_xfer(tsc, READ_Z2); + *val = tsc2007_calculate_resistance(tsc, &tc); + break; + } + case 6: + *val = tsc2007_is_pen_down(tsc); + break; + case 7: + *val = tsc2007_xfer(tsc, + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0)); + break; + case 8: + *val = tsc2007_xfer(tsc, + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1)); + break; + } + + /* Prepare for next touch reading - power down ADC, enable PENIRQ */ + tsc2007_xfer(tsc, PWRDOWN); + + mutex_unlock(&tsc->mlock); + + ret = IIO_VAL_INT; + + return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module = THIS_MODULE, +}; + +int tsc2007_iio_configure(struct tsc2007 *ts) +{ + int err; + struct iio_dev *indio_dev; + struct tsc2007_iio *iio; + + indio_dev = devm_iio_device_alloc(&ts->client->dev, + sizeof(struct tsc2007_iio)); + if (!indio_dev) { + dev_err(&ts->client->dev, "iio_device_alloc failed\n"); + return -ENOMEM; + } + + iio = iio_priv(indio_dev); + iio->ts = ts; + ts->iio_dev = (void *) indio_dev; + + indio_dev->name = "tsc2007"; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel); + + err = iio_device_register(indio_dev); + if (err < 0) { + dev_err(&ts->client->dev, "iio_device_register() failed: %d\n", + err); + return err; + } + + return 0; +} +EXPORT_SYMBOL(tsc2007_iio_configure); + +void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ + struct iio_dev *indio_dev = ts->iio_dev; + + iio_device_unregister(indio_dev); +} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
On 11/11/16 19:02, H. Nikolaus Schaller wrote:
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
I ran a quick build test and it blows up in a number of ways related to the #ifdef CONFIG_IIO.
I'm not entirely sure why but #if IS_ENABLED(CONFIG_IIO) works fine.
Otherwise looks good to me
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Jonathan Cameron jic23@kernel.org
drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 118 ++++++++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 119 ++++++---------- drivers/input/touchscreen/tsc2007_iio.c | 152 +++++++++++++++++++++ 4 files changed, 310 insertions(+), 81 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (85%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..d932e2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 0000000..5049bf8 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,118 @@ +/*
- drivers/input/touchscreen/tsc2007.h
- Copyright (c) 2008 MtekVision Co., Ltd.
- Kwangwoo Lee kwlee@mtekvision.com
- Using code from:
- ads7846.c
- Copyright (c) 2005 David Brownell
- Copyright (c) 2006 Nokia Corporation
- corgi_ts.c
- Copyright (C) 2004-2005 Richard Purdie
- omap_ts.[hc], ads7846.h, ts_osk.c
- Copyright (C) 2002 MontaVista Software
- Copyright (C) 2004 Texas Instruments
- Copyright (C) 2005 Dirk Behme
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/input/touchscreen.h>
+#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4)
+#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
+#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1)
+#define MAX_12BIT ((1 << 12) - 1)
+#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
+};
+struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
- unsigned int gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
- struct mutex mlock;
- struct iio_dev *iio_dev; /* optional */
+};
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
struct ts_event *tc);+bool tsc2007_is_pen_down(struct tsc2007 *ts);
+#ifdef CONFIG_IIO
+/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
+#else /* CONFIG_IIO */
+static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{
- return 0;
+} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +}
+#endif /* CONFIG_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c similarity index 85% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 5e3c4bf..72775ae 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,80 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h>
-#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4)
-#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
-#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1)
-#define MAX_12BIT ((1 << 12) - 1)
-#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
-#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
-struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
-};
-struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
+#include "tsc2007.h"
- unsigned gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
-};
-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
return val; } +EXPORT_SYMBOL(tsc2007_xfer);
static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) { @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
return rt; } +EXPORT_SYMBOL(tsc2007_calculate_resistance);
-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007 *ts)
return ts->get_pendown_state(&ts->client->dev); } +EXPORT_SYMBOL(tsc2007_is_pen_down);
static irqreturn_t tsc2007_soft_irq(int irq, void *handle) { @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */
mutex_lock(&ts->mlock);tsc2007_read_values(ts, &tc);
mutex_unlock(&ts->mlock);rt = tsc2007_calculate_resistance(ts, &tc);
@@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) {
- const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
- const struct tsc2007_platform_data *pdata =
dev_get_platdata(&client->dev);@@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev;
err = tsc2007_iio_configure(ts);
if (err < 0)
return err;init_waitqueue_head(&ts->wait);
mutex_init(&ts->mlock);
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev));
@@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client *client, if (pdata) { err = tsc2007_probe_pdev(client, ts, pdata, id); if (err)
return err;
goto probe_err;@@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client *client, } else { err = tsc2007_probe_dt(client, ts); if (err)
return err;
goto probe_err;}
if (pdata) {
@@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client *client, dev_err(&client->dev, "Failed to register exit_platform_hw action, %d\n", err);
return err;
goto probe_err; }@@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "Failed to request irq %d: %d\n", ts->irq, err);
return err;
goto probe_err;}
tsc2007_stop(ts);
@@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client *client, if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err);
return err; /* usually, chip does not respond */
goto probe_err; /* chip does not respond */}
err = input_register_device(input_dev); if (err) { dev_err(&client->dev, "Failed to register input device: %d\n", err);
return err;
goto probe_err;}
return 0;
+probe_err:
- tsc2007_iio_unconfigure(ts);
- return err;
+}
+static int tsc2007_remove(struct i2c_client *client) +{
- struct tsc2007 *ts = i2c_get_clientdata(client);
- tsc2007_iio_unconfigure(ts);
- input_unregister_device(ts->input);
- return 0;
}
static const struct i2c_device_id tsc2007_idtable[] = { @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe,
- .remove = tsc2007_remove,
};
module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 0000000..e492bba --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,152 @@ +/*
- drivers/input/touchscreen/tsc2007_iio.c
- Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
- Nikolaus Schaller hns@goldelico.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h"
+struct tsc2007_iio {
- struct tsc2007 *ts;
+};
+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \
- .datasheet_name = _name, \
- .type = _type, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(_chan_info), \- .indexed = 1, \
- .channel = _chan, \
+}
+static const struct iio_chan_spec tsc2007_iio_channel[] = {
- TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
- TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
+};
+static int tsc2007_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
- struct tsc2007_iio *iio = iio_priv(indio_dev);
- struct tsc2007 *tsc = iio->ts;
- int adc_chan = chan->channel;
- int ret = 0;
- if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
return -EINVAL;- if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;- mutex_lock(&tsc->mlock);
- switch (chan->channel) {
- case 0:
*val = tsc2007_xfer(tsc, READ_X);break;- case 1:
*val = tsc2007_xfer(tsc, READ_Y);break;- case 2:
*val = tsc2007_xfer(tsc, READ_Z1);break;- case 3:
*val = tsc2007_xfer(tsc, READ_Z2);break;- case 4:
*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));break;- case 5: {
struct ts_event tc;tc.x = tsc2007_xfer(tsc, READ_X);tc.z1 = tsc2007_xfer(tsc, READ_Z1);tc.z2 = tsc2007_xfer(tsc, READ_Z2);*val = tsc2007_calculate_resistance(tsc, &tc);break;- }
- case 6:
*val = tsc2007_is_pen_down(tsc);break;- case 7:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));break;- case 8:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));break;- }
- /* Prepare for next touch reading - power down ADC, enable PENIRQ */
- tsc2007_xfer(tsc, PWRDOWN);
- mutex_unlock(&tsc->mlock);
- ret = IIO_VAL_INT;
- return ret;
+}
+static const struct iio_info tsc2007_iio_info = {
- .read_raw = tsc2007_read_raw,
- .driver_module = THIS_MODULE,
+};
+int tsc2007_iio_configure(struct tsc2007 *ts) +{
- int err;
- struct iio_dev *indio_dev;
- struct tsc2007_iio *iio;
- indio_dev = devm_iio_device_alloc(&ts->client->dev,
sizeof(struct tsc2007_iio));- if (!indio_dev) {
dev_err(&ts->client->dev, "iio_device_alloc failed\n");return -ENOMEM;- }
- iio = iio_priv(indio_dev);
- iio->ts = ts;
- ts->iio_dev = (void *) indio_dev;
- indio_dev->name = "tsc2007";
- indio_dev->dev.parent = &ts->client->dev;
- indio_dev->info = &tsc2007_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = tsc2007_iio_channel;
- indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
- err = iio_device_register(indio_dev);
- if (err < 0) {
dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",err);return err;- }
- return 0;
+} +EXPORT_SYMBOL(tsc2007_iio_configure);
+void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{
- struct iio_dev *indio_dev = ts->iio_dev;
- iio_device_unregister(indio_dev);
+} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
On 12/11/16 14:04, Jonathan Cameron wrote:
On 11/11/16 19:02, H. Nikolaus Schaller wrote:
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
I ran a quick build test and it blows up in a number of ways related to the #ifdef CONFIG_IIO.
I'm not entirely sure why but #if IS_ENABLED(CONFIG_IIO) works fine.
Ah, I'm being sleepy today. It's because I'm building IIO as a module and the symbol defined would therefore be CONFIG_IIO_MODULE.
The IS_ENABLED macro takes care of both cases.
Otherwise looks good to me
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Jonathan Cameron jic23@kernel.org
drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 118 ++++++++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 119 ++++++---------- drivers/input/touchscreen/tsc2007_iio.c | 152 +++++++++++++++++++++ 4 files changed, 310 insertions(+), 81 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (85%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..d932e2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 0000000..5049bf8 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,118 @@ +/*
- drivers/input/touchscreen/tsc2007.h
- Copyright (c) 2008 MtekVision Co., Ltd.
- Kwangwoo Lee kwlee@mtekvision.com
- Using code from:
- ads7846.c
- Copyright (c) 2005 David Brownell
- Copyright (c) 2006 Nokia Corporation
- corgi_ts.c
- Copyright (C) 2004-2005 Richard Purdie
- omap_ts.[hc], ads7846.h, ts_osk.c
- Copyright (C) 2002 MontaVista Software
- Copyright (C) 2004 Texas Instruments
- Copyright (C) 2005 Dirk Behme
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/input/touchscreen.h>
+#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4)
+#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
+#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1)
+#define MAX_12BIT ((1 << 12) - 1)
+#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
+};
+struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
- unsigned int gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
- struct mutex mlock;
- struct iio_dev *iio_dev; /* optional */
+};
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
struct ts_event *tc);+bool tsc2007_is_pen_down(struct tsc2007 *ts);
+#ifdef CONFIG_IIO
+/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
+#else /* CONFIG_IIO */
+static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{
- return 0;
+} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +}
+#endif /* CONFIG_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c similarity index 85% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 5e3c4bf..72775ae 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,80 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h>
-#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4)
-#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
-#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1)
-#define MAX_12BIT ((1 << 12) - 1)
-#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
-#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
-struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
-};
-struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
+#include "tsc2007.h"
- unsigned gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
-};
-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
return val; } +EXPORT_SYMBOL(tsc2007_xfer);
static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) { @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
return rt; } +EXPORT_SYMBOL(tsc2007_calculate_resistance);
-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007 *ts)
return ts->get_pendown_state(&ts->client->dev); } +EXPORT_SYMBOL(tsc2007_is_pen_down);
static irqreturn_t tsc2007_soft_irq(int irq, void *handle) { @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */
mutex_lock(&ts->mlock);tsc2007_read_values(ts, &tc);
mutex_unlock(&ts->mlock);rt = tsc2007_calculate_resistance(ts, &tc);
@@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) {
- const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
- const struct tsc2007_platform_data *pdata =
dev_get_platdata(&client->dev);@@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev;
err = tsc2007_iio_configure(ts);
if (err < 0)
return err;init_waitqueue_head(&ts->wait);
mutex_init(&ts->mlock);
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev));
@@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client *client, if (pdata) { err = tsc2007_probe_pdev(client, ts, pdata, id); if (err)
return err;
goto probe_err;@@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client *client, } else { err = tsc2007_probe_dt(client, ts); if (err)
return err;
goto probe_err;}
if (pdata) {
@@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client *client, dev_err(&client->dev, "Failed to register exit_platform_hw action, %d\n", err);
return err;
goto probe_err; }@@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "Failed to request irq %d: %d\n", ts->irq, err);
return err;
goto probe_err;}
tsc2007_stop(ts);
@@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client *client, if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err);
return err; /* usually, chip does not respond */
goto probe_err; /* chip does not respond */}
err = input_register_device(input_dev); if (err) { dev_err(&client->dev, "Failed to register input device: %d\n", err);
return err;
goto probe_err;}
return 0;
+probe_err:
- tsc2007_iio_unconfigure(ts);
- return err;
+}
+static int tsc2007_remove(struct i2c_client *client) +{
- struct tsc2007 *ts = i2c_get_clientdata(client);
- tsc2007_iio_unconfigure(ts);
- input_unregister_device(ts->input);
- return 0;
}
static const struct i2c_device_id tsc2007_idtable[] = { @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe,
- .remove = tsc2007_remove,
};
module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 0000000..e492bba --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,152 @@ +/*
- drivers/input/touchscreen/tsc2007_iio.c
- Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
- Nikolaus Schaller hns@goldelico.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h"
+struct tsc2007_iio {
- struct tsc2007 *ts;
+};
+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \
- .datasheet_name = _name, \
- .type = _type, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(_chan_info), \- .indexed = 1, \
- .channel = _chan, \
+}
+static const struct iio_chan_spec tsc2007_iio_channel[] = {
- TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
- TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
+};
+static int tsc2007_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
- struct tsc2007_iio *iio = iio_priv(indio_dev);
- struct tsc2007 *tsc = iio->ts;
- int adc_chan = chan->channel;
- int ret = 0;
- if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
return -EINVAL;- if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;- mutex_lock(&tsc->mlock);
- switch (chan->channel) {
- case 0:
*val = tsc2007_xfer(tsc, READ_X);break;- case 1:
*val = tsc2007_xfer(tsc, READ_Y);break;- case 2:
*val = tsc2007_xfer(tsc, READ_Z1);break;- case 3:
*val = tsc2007_xfer(tsc, READ_Z2);break;- case 4:
*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));break;- case 5: {
struct ts_event tc;tc.x = tsc2007_xfer(tsc, READ_X);tc.z1 = tsc2007_xfer(tsc, READ_Z1);tc.z2 = tsc2007_xfer(tsc, READ_Z2);*val = tsc2007_calculate_resistance(tsc, &tc);break;- }
- case 6:
*val = tsc2007_is_pen_down(tsc);break;- case 7:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));break;- case 8:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));break;- }
- /* Prepare for next touch reading - power down ADC, enable PENIRQ */
- tsc2007_xfer(tsc, PWRDOWN);
- mutex_unlock(&tsc->mlock);
- ret = IIO_VAL_INT;
- return ret;
+}
+static const struct iio_info tsc2007_iio_info = {
- .read_raw = tsc2007_read_raw,
- .driver_module = THIS_MODULE,
+};
+int tsc2007_iio_configure(struct tsc2007 *ts) +{
- int err;
- struct iio_dev *indio_dev;
- struct tsc2007_iio *iio;
- indio_dev = devm_iio_device_alloc(&ts->client->dev,
sizeof(struct tsc2007_iio));- if (!indio_dev) {
dev_err(&ts->client->dev, "iio_device_alloc failed\n");return -ENOMEM;- }
- iio = iio_priv(indio_dev);
- iio->ts = ts;
- ts->iio_dev = (void *) indio_dev;
- indio_dev->name = "tsc2007";
- indio_dev->dev.parent = &ts->client->dev;
- indio_dev->info = &tsc2007_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = tsc2007_iio_channel;
- indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
- err = iio_device_register(indio_dev);
- if (err < 0) {
dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",err);return err;- }
- return 0;
+} +EXPORT_SYMBOL(tsc2007_iio_configure);
+void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{
- struct iio_dev *indio_dev = ts->iio_dev;
- iio_device_unregister(indio_dev);
+} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
-- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 12.11.2016 um 15:19 schrieb Jonathan Cameron jic23@kernel.org:
On 12/11/16 14:04, Jonathan Cameron wrote:
On 11/11/16 19:02, H. Nikolaus Schaller wrote:
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
I ran a quick build test and it blows up in a number of ways related to the #ifdef CONFIG_IIO.
I'm not entirely sure why but #if IS_ENABLED(CONFIG_IIO) works fine.
Ah, I'm being sleepy today. It's because I'm building IIO as a module and the symbol defined would therefore be CONFIG_IIO_MODULE.
The IS_ENABLED macro takes care of both cases.
Ah, yes. I wasn't aware that CONFIG_IIO is tristate at all. We have it as "y" and therefore didn't notice.
I will collect this fix for V8.
Otherwise looks good to me
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Jonathan Cameron jic23@kernel.org
Will add this as well.
Thanks for the detailled review!
BR, Nikolaus
On Sat, Nov 12, 2016 at 02:19:30PM +0000, Jonathan Cameron wrote:
On 12/11/16 14:04, Jonathan Cameron wrote:
On 11/11/16 19:02, H. Nikolaus Schaller wrote:
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
I ran a quick build test and it blows up in a number of ways related to the #ifdef CONFIG_IIO.
I'm not entirely sure why but #if IS_ENABLED(CONFIG_IIO) works fine.
Ah, I'm being sleepy today. It's because I'm building IIO as a module and the symbol defined would therefore be CONFIG_IIO_MODULE.
The IS_ENABLED macro takes care of both cases.
No it doesn't. Have you tried building the driver into the kernel with IIO as a module?
Otherwise looks good to me
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Jonathan Cameron jic23@kernel.org
drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 118 ++++++++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 119 ++++++---------- drivers/input/touchscreen/tsc2007_iio.c | 152 +++++++++++++++++++++ 4 files changed, 310 insertions(+), 81 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (85%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..d932e2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 0000000..5049bf8 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,118 @@ +/*
- drivers/input/touchscreen/tsc2007.h
- Copyright (c) 2008 MtekVision Co., Ltd.
- Kwangwoo Lee kwlee@mtekvision.com
- Using code from:
- ads7846.c
- Copyright (c) 2005 David Brownell
- Copyright (c) 2006 Nokia Corporation
- corgi_ts.c
- Copyright (C) 2004-2005 Richard Purdie
- omap_ts.[hc], ads7846.h, ts_osk.c
- Copyright (C) 2002 MontaVista Software
- Copyright (C) 2004 Texas Instruments
- Copyright (C) 2005 Dirk Behme
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/input/touchscreen.h>
+#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4)
+#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
+#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1)
+#define MAX_12BIT ((1 << 12) - 1)
+#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
+};
+struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
- unsigned int gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
- struct mutex mlock;
- struct iio_dev *iio_dev; /* optional */
+};
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
struct ts_event *tc);+bool tsc2007_is_pen_down(struct tsc2007 *ts);
+#ifdef CONFIG_IIO
+/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
+#else /* CONFIG_IIO */
+static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{
- return 0;
+} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +}
+#endif /* CONFIG_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c similarity index 85% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 5e3c4bf..72775ae 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,80 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h>
-#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4)
-#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
-#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1)
-#define MAX_12BIT ((1 << 12) - 1)
-#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
-#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
-struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
-};
-struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
+#include "tsc2007.h"
- unsigned gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
-};
-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
return val; } +EXPORT_SYMBOL(tsc2007_xfer);
static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) { @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
return rt; } +EXPORT_SYMBOL(tsc2007_calculate_resistance);
-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007 *ts)
return ts->get_pendown_state(&ts->client->dev); } +EXPORT_SYMBOL(tsc2007_is_pen_down);
static irqreturn_t tsc2007_soft_irq(int irq, void *handle) { @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */
mutex_lock(&ts->mlock);tsc2007_read_values(ts, &tc);
mutex_unlock(&ts->mlock);rt = tsc2007_calculate_resistance(ts, &tc);
@@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) {
- const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
- const struct tsc2007_platform_data *pdata =
dev_get_platdata(&client->dev);@@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev;
err = tsc2007_iio_configure(ts);
if (err < 0)
return err;init_waitqueue_head(&ts->wait);
mutex_init(&ts->mlock);
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev));
@@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client *client, if (pdata) { err = tsc2007_probe_pdev(client, ts, pdata, id); if (err)
return err;
goto probe_err;@@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client *client, } else { err = tsc2007_probe_dt(client, ts); if (err)
return err;
goto probe_err;}
if (pdata) {
@@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client *client, dev_err(&client->dev, "Failed to register exit_platform_hw action, %d\n", err);
return err;
goto probe_err; }@@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "Failed to request irq %d: %d\n", ts->irq, err);
return err;
goto probe_err;}
tsc2007_stop(ts);
@@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client *client, if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err);
return err; /* usually, chip does not respond */
goto probe_err; /* chip does not respond */}
err = input_register_device(input_dev); if (err) { dev_err(&client->dev, "Failed to register input device: %d\n", err);
return err;
goto probe_err;}
return 0;
+probe_err:
- tsc2007_iio_unconfigure(ts);
- return err;
+}
+static int tsc2007_remove(struct i2c_client *client) +{
- struct tsc2007 *ts = i2c_get_clientdata(client);
- tsc2007_iio_unconfigure(ts);
- input_unregister_device(ts->input);
- return 0;
}
static const struct i2c_device_id tsc2007_idtable[] = { @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe,
- .remove = tsc2007_remove,
};
module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 0000000..e492bba --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,152 @@ +/*
- drivers/input/touchscreen/tsc2007_iio.c
- Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
- Nikolaus Schaller hns@goldelico.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h"
+struct tsc2007_iio {
- struct tsc2007 *ts;
+};
+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \
- .datasheet_name = _name, \
- .type = _type, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(_chan_info), \- .indexed = 1, \
- .channel = _chan, \
+}
+static const struct iio_chan_spec tsc2007_iio_channel[] = {
- TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
- TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
+};
+static int tsc2007_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
- struct tsc2007_iio *iio = iio_priv(indio_dev);
- struct tsc2007 *tsc = iio->ts;
- int adc_chan = chan->channel;
- int ret = 0;
- if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
return -EINVAL;- if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;- mutex_lock(&tsc->mlock);
- switch (chan->channel) {
- case 0:
*val = tsc2007_xfer(tsc, READ_X);break;- case 1:
*val = tsc2007_xfer(tsc, READ_Y);break;- case 2:
*val = tsc2007_xfer(tsc, READ_Z1);break;- case 3:
*val = tsc2007_xfer(tsc, READ_Z2);break;- case 4:
*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));break;- case 5: {
struct ts_event tc;tc.x = tsc2007_xfer(tsc, READ_X);tc.z1 = tsc2007_xfer(tsc, READ_Z1);tc.z2 = tsc2007_xfer(tsc, READ_Z2);*val = tsc2007_calculate_resistance(tsc, &tc);break;- }
- case 6:
*val = tsc2007_is_pen_down(tsc);break;- case 7:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));break;- case 8:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));break;- }
- /* Prepare for next touch reading - power down ADC, enable PENIRQ */
- tsc2007_xfer(tsc, PWRDOWN);
- mutex_unlock(&tsc->mlock);
- ret = IIO_VAL_INT;
- return ret;
+}
+static const struct iio_info tsc2007_iio_info = {
- .read_raw = tsc2007_read_raw,
- .driver_module = THIS_MODULE,
+};
+int tsc2007_iio_configure(struct tsc2007 *ts) +{
- int err;
- struct iio_dev *indio_dev;
- struct tsc2007_iio *iio;
- indio_dev = devm_iio_device_alloc(&ts->client->dev,
sizeof(struct tsc2007_iio));- if (!indio_dev) {
dev_err(&ts->client->dev, "iio_device_alloc failed\n");return -ENOMEM;- }
- iio = iio_priv(indio_dev);
- iio->ts = ts;
- ts->iio_dev = (void *) indio_dev;
- indio_dev->name = "tsc2007";
- indio_dev->dev.parent = &ts->client->dev;
- indio_dev->info = &tsc2007_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = tsc2007_iio_channel;
- indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
- err = iio_device_register(indio_dev);
- if (err < 0) {
dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",err);return err;- }
- return 0;
+} +EXPORT_SYMBOL(tsc2007_iio_configure);
+void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{
- struct iio_dev *indio_dev = ts->iio_dev;
- iio_device_unregister(indio_dev);
+} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
-- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 19 November 2016 18:38:49 GMT+00:00, Dmitry Torokhov dmitry.torokhov@gmail.com wrote:
On Sat, Nov 12, 2016 at 02:19:30PM +0000, Jonathan Cameron wrote:
On 12/11/16 14:04, Jonathan Cameron wrote:
On 11/11/16 19:02, H. Nikolaus Schaller wrote:
The tsc2007 chip not only has a resistive touch screen controller
but
also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very
straightforward,
we simply provide all other adc channels as optional iio
interfaces
as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
I ran a quick build test and it blows up in a number of ways
related to
the #ifdef CONFIG_IIO.
I'm not entirely sure why but #if IS_ENABLED(CONFIG_IIO) works fine.
Ah, I'm being sleepy today. It's because I'm building IIO as a
module
and the symbol defined would therefore be CONFIG_IIO_MODULE.
The IS_ENABLED macro takes care of both cases.
No it doesn't. Have you tried building the driver into the kernel with IIO as a module?
Fair point. Is there a clean way of handling this?
Otherwise looks good to me
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Reviewed-by: Jonathan Cameron jic23@kernel.org
drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 118
++++++++++++++++
.../touchscreen/{tsc2007.c => tsc2007_core.c} | 119
++++++----------
drivers/input/touchscreen/tsc2007_iio.c | 152
+++++++++++++++++++++
4 files changed, 310 insertions(+), 81 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c}
(85%)
create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index 81b8645..d932e2d 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h
b/drivers/input/touchscreen/tsc2007.h
new file mode 100644 index 0000000..5049bf8 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,118 @@ +/*
- drivers/input/touchscreen/tsc2007.h
- Copyright (c) 2008 MtekVision Co., Ltd.
- Kwangwoo Lee kwlee@mtekvision.com
- Using code from:
- ads7846.c
- Copyright (c) 2005 David Brownell
- Copyright (c) 2006 Nokia Corporation
- corgi_ts.c
- Copyright (C) 2004-2005 Richard Purdie
- omap_ts.[hc], ads7846.h, ts_osk.c
- Copyright (C) 2002 MontaVista Software
- Copyright (C) 2004 Texas Instruments
- Copyright (C) 2005 Dirk Behme
- This program is free software; you can redistribute it and/or
modify
- it under the terms of the GNU General Public License version
2 as
- published by the Free Software Foundation.
- */
+#include <linux/input/touchscreen.h>
+#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4)
+#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
+#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1)
+#define MAX_12BIT ((1 << 12) - 1)
+#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
+};
+struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
- unsigned int gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
- struct mutex mlock;
- struct iio_dev *iio_dev; /* optional */
+};
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
struct ts_event *tc);+bool tsc2007_is_pen_down(struct tsc2007 *ts);
+#ifdef CONFIG_IIO
+/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
+#else /* CONFIG_IIO */
+static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{
- return 0;
+} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +}
+#endif /* CONFIG_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c
b/drivers/input/touchscreen/tsc2007_core.c
similarity index 85% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 5e3c4bf..72775ae 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,80 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h>
-#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4)
-#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
-#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1)
-#define MAX_12BIT ((1 << 12) - 1)
-#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
-#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
-struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
-};
-struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- struct touchscreen_properties prop;
- bool report_resistance;
- u16 min_x;
- u16 min_y;
- u16 max_x;
- u16 max_y;
- u16 max_rt;
- unsigned long poll_period; /* in jiffies */
- int fuzzx;
- int fuzzy;
- int fuzzz;
+#include "tsc2007.h"
- unsigned gpio;
- int irq;
- wait_queue_head_t wait;
- bool stopped;
- bool pendown;
- int (*get_pendown_state)(struct device *);
- void (*clear_penirq)(void);
-};
-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007
*tsc, u8 cmd)
return val; } +EXPORT_SYMBOL(tsc2007_xfer);
static void tsc2007_read_values(struct tsc2007 *tsc, struct
ts_event *tc)
{ @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007
*tsc, struct ts_event *tc)
tsc2007_xfer(tsc, PWRDOWN); }
-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct
tsc2007 *tsc,
return rt; } +EXPORT_SYMBOL(tsc2007_calculate_resistance);
-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007
*ts)
return ts->get_pendown_state(&ts->client->dev); } +EXPORT_SYMBOL(tsc2007_is_pen_down);
static irqreturn_t tsc2007_soft_irq(int irq, void *handle) { @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq,
void *handle)
while (!ts->stopped && tsc2007_is_pen_down(ts)) {
/* pen is down, continue with the measurement */
mutex_lock(&ts->mlock);tsc2007_read_values(ts, &tc);
mutex_unlock(&ts->mlock);rt = tsc2007_calculate_resistance(ts, &tc);
@@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void
*data)
static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) {
- const struct tsc2007_platform_data *pdata =
dev_get_platdata(&client->dev);
- const struct tsc2007_platform_data *pdata =
dev_get_platdata(&client->dev);@@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client
*client,
ts->client = client; ts->irq = client->irq; ts->input = input_dev;
err = tsc2007_iio_configure(ts);
if (err < 0)
return err;init_waitqueue_head(&ts->wait);
mutex_init(&ts->mlock);
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev));
@@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client
*client,
if (pdata) { err = tsc2007_probe_pdev(client, ts, pdata, id); if (err)
return err;
goto probe_err;@@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client
*client,
} else { err = tsc2007_probe_dt(client, ts); if (err)
return err;
goto probe_err;}
if (pdata) {
@@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client
*client,
dev_err(&client->dev, "Failed to register exit_platform_hw action, %d\n", err);
return err;
goto probe_err; }@@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client
*client,
if (err) { dev_err(&client->dev, "Failed to request irq %d: %d\n", ts->irq, err);
return err;
goto probe_err;}
tsc2007_stop(ts);
@@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client
*client,
if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err);
return err; /* usually, chip does not respond */
goto probe_err; /* chip does not respond */}
err = input_register_device(input_dev); if (err) { dev_err(&client->dev, "Failed to register input device: %d\n", err);
return err;
goto probe_err;}
return 0;
+probe_err:
- tsc2007_iio_unconfigure(ts);
- return err;
+}
+static int tsc2007_remove(struct i2c_client *client) +{
- struct tsc2007 *ts = i2c_get_clientdata(client);
- tsc2007_iio_unconfigure(ts);
- input_unregister_device(ts->input);
- return 0;
}
static const struct i2c_device_id tsc2007_idtable[] = { @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe,
- .remove = tsc2007_remove,
};
module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c
b/drivers/input/touchscreen/tsc2007_iio.c
new file mode 100644 index 0000000..e492bba --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,152 @@ +/*
- drivers/input/touchscreen/tsc2007_iio.c
- Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
- Nikolaus Schaller hns@goldelico.com
- This program is free software; you can redistribute it and/or
modify
- it under the terms of the GNU General Public License version
2 as
- published by the Free Software Foundation.
- */
+#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h"
+struct tsc2007_iio {
- struct tsc2007 *ts;
+};
+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \
- .datasheet_name = _name, \
- .type = _type, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(_chan_info), \- .indexed = 1, \
- .channel = _chan, \
+}
+static const struct iio_chan_spec tsc2007_iio_channel[] = {
- TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /*
Ohms? */
- TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
- TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
+};
+static int tsc2007_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int *val, int *val2, long
mask)
+{
- struct tsc2007_iio *iio = iio_priv(indio_dev);
- struct tsc2007 *tsc = iio->ts;
- int adc_chan = chan->channel;
- int ret = 0;
- if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
return -EINVAL;- if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;- mutex_lock(&tsc->mlock);
- switch (chan->channel) {
- case 0:
*val = tsc2007_xfer(tsc, READ_X);break;- case 1:
*val = tsc2007_xfer(tsc, READ_Y);break;- case 2:
*val = tsc2007_xfer(tsc, READ_Z1);break;- case 3:
*val = tsc2007_xfer(tsc, READ_Z2);break;- case 4:
*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));break;- case 5: {
struct ts_event tc;tc.x = tsc2007_xfer(tsc, READ_X);tc.z1 = tsc2007_xfer(tsc, READ_Z1);tc.z2 = tsc2007_xfer(tsc, READ_Z2);*val = tsc2007_calculate_resistance(tsc, &tc);break;- }
- case 6:
*val = tsc2007_is_pen_down(tsc);break;- case 7:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));break;- case 8:
*val = tsc2007_xfer(tsc,(ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));break;- }
- /* Prepare for next touch reading - power down ADC, enable
PENIRQ */
- tsc2007_xfer(tsc, PWRDOWN);
- mutex_unlock(&tsc->mlock);
- ret = IIO_VAL_INT;
- return ret;
+}
+static const struct iio_info tsc2007_iio_info = {
- .read_raw = tsc2007_read_raw,
- .driver_module = THIS_MODULE,
+};
+int tsc2007_iio_configure(struct tsc2007 *ts) +{
- int err;
- struct iio_dev *indio_dev;
- struct tsc2007_iio *iio;
- indio_dev = devm_iio_device_alloc(&ts->client->dev,
sizeof(struct tsc2007_iio));- if (!indio_dev) {
dev_err(&ts->client->dev, "iio_device_alloc failed\n");return -ENOMEM;- }
- iio = iio_priv(indio_dev);
- iio->ts = ts;
- ts->iio_dev = (void *) indio_dev;
- indio_dev->name = "tsc2007";
- indio_dev->dev.parent = &ts->client->dev;
- indio_dev->info = &tsc2007_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = tsc2007_iio_channel;
- indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
- err = iio_device_register(indio_dev);
- if (err < 0) {
dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",err);return err;- }
- return 0;
+} +EXPORT_SYMBOL(tsc2007_iio_configure);
+void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{
- struct iio_dev *indio_dev = ts->iio_dev;
- iio_device_unregister(indio_dev);
+} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
-- To unsubscribe from this list: send the line "unsubscribe
linux-iio" in
the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dmitry and Jonathan,
Am 19.11.2016 um 21:09 schrieb Jonathan Cameron jic23@jic23.retrosnub.co.uk:
The IS_ENABLED macro takes care of both cases.
No it doesn't. Have you tried building the driver into the kernel with IIO as a module?
I have tried and it indeed fails to compile.
Fair point. Is there a clean way of handling this?
This seems to basically work and I have included it in [PATCH v8]:
obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o tsc2007-y := tsc2007_core.o ifeq ($(CONFIG_IIO),y) tsc2007-y += tsc2007_iio.o endif ifeq ($(CONFIG_IIO),m) tsc2007-y += tsc2007_iio.o endif obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
but still has a problem because it is not possible to reference functions from the iio core with CONFIG_IIO=m from a driver built into the kernel:
drivers/built-in.o: In function `tsc2007_iio_unconfigure': /Users/hns/Sources/System/Kernel/Linux/src/master/drivers/input/touchscreen/tsc2007_iio.c:148: undefined reference to `iio_device_unregister' drivers/built-in.o: In function `tsc2007_iio_configure': /Users/hns/Sources/System/Kernel/Linux/src/master/drivers/input/touchscreen/tsc2007_iio.c:115: undefined reference to `devm_iio_device_alloc' /Users/hns/Sources/System/Kernel/Linux/src/master/drivers/input/touchscreen/tsc2007_iio.c:133: undefined reference to `iio_device_register'
So it would mean that we have to dynamically locate and bind iio_device_(un)register and devm_iio_device_alloc.
BR and thanks, Nikolaus
While we fix the GTA04 we add proper pinmux for the penirq gpio.
Tested on: GTA04A4 and Pyra-Handheld
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Acked-by: Tony Lindgren tony@atomide.com --- arch/arm/boot/dts/omap3-gta04.dtsi | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b3a8b1f..64d6ee3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -273,6 +273,13 @@ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ + >; + }; };
&omap3_pmx_core2 { @@ -410,10 +417,24 @@ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = <600>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ + touchscreen-size-x = <480>; + touchscreen-size-y = <640>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <3>; + touchscreen-fuzz-y = <8>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-y; + ti,min-x = <0x100>; + ti,max-x = <0xf00>; + ti,min-y = <0x100>; + ti,max-y = <0xf00>; + ti,max-rt = <4096>; + ti,x-plate-ohms = <550>; };
/* RFID EEPROM */
commit b98abe52fa8e ("Input: add common DT binding for touchscreens") introduced common DT bindings for touchscreens [1] and a helper function to parse the DT.
commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes") added another helper for parsing axis inversion and swapping and applying them to x and y coordinates.
Both helpers have been integrated to accommodate any orientation of the touch panel in relation to the LCD.
A new feature is to introduce scaling the min/max ADC values to the screen size.
This makes it possible to pre-calibrate the touch so that is (almost) exactly matches the LCD pixel coordinates it is glued onto. This allows to well enough operate the touch before a user space calibration step can improve the precision.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Acked-by: Rob Herring robh@kernel.org --- .../devicetree/bindings/input/ads7846.txt | 9 +++- drivers/input/touchscreen/ads7846.c | 60 ++++++++++++++++++---- 2 files changed, 57 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index 9fc47b0..29f91ed 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -26,6 +26,12 @@ Additional required properties:
Optional properties:
+You can optionally specify any of the touchscreen parameters described in + + Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt + +This allows to scale, invert or swap coordinates and define the fuzz factors. + ti,vref-delay-usecs vref supply delay in usecs, 0 for external vref (u16). ti,vref-mv The VREF voltage, in millivolts (u16). @@ -33,7 +39,7 @@ Optional properties: (ADS7846). ti,keep-vref-on set to keep vref on for differential measurements as well - ti,swap-xy swap x and y axis + ti,swap-xy deprecated name for touchscreen-swapped-x-y ti,settle-delay-usec Settling time of the analog signals; a function of Vcc and the capacitance on the X/Y drivers. If set to non-zero, @@ -82,6 +88,7 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: pendown-gpio = <&gpio1 8 0>; vcc-supply = <®_vcc3>;
+ touchscreen-swapped-x-y; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <8000>; ti,y-min = /bits/ 16 <0>; diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 1ce3ecb..400e421 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -34,6 +34,7 @@ #include <linux/spi/ads7846.h> #include <linux/regulator/consumer.h> #include <linux/module.h> +#include <linux/input/touchscreen.h> #include <asm/irq.h>
/* @@ -109,8 +110,13 @@ struct ads7846 { u16 vref_delay_usecs; u16 x_plate_ohms; u16 pressure_max; + u16 x_min; + u16 x_max; + u16 y_min; + u16 y_max; + + struct touchscreen_properties prop;
- bool swap_xy; bool use_internal;
struct ads7846_packet *packet; @@ -825,22 +831,36 @@ static void ads7846_report_state(struct ads7846 *ts) */ if (Rt) { struct input_dev *input = ts->input; + int sx, sy; + + dev_dbg(&ts->spi->dev, + "Raw point(%4d,%4d), pressure (%4u)\n", + x, y, Rt); + + /* scale ADC values to desired output range */ + sx = (ts->prop.max_x * (x - ts->x_min)) + / (ts->x_max - ts->x_min); + sy = (ts->prop.max_y * (y - ts->y_min)) + / (ts->y_max - ts->y_min);
- if (ts->swap_xy) - swap(x, y); + dev_dbg(&ts->spi->dev, + "Scaled point(%4d,%4d), pressure (%4u)\n", + sx, sy, Rt);
+ /* report event */ if (!ts->pendown) { input_report_key(input, BTN_TOUCH, 1); ts->pendown = true; dev_vdbg(&ts->spi->dev, "DOWN\n"); }
- input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); + touchscreen_report_pos(ts->input, &ts->prop, + (unsigned int) sx, (unsigned int) sy, + false); input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
input_sync(input); - dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt); + dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", sx, sy, Rt); } }
@@ -1212,6 +1232,8 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy"); + if (pdata->swap_xy) + dev_notice(dev, "please update device tree to use touchscreen-swapped-x-y");
of_property_read_u16(node, "ti,settle-delay-usec", &pdata->settle_delay_usecs); @@ -1315,7 +1337,6 @@ static int ads7846_probe(struct spi_device *spi) ts->pressure_max = pdata->pressure_max ? : ~0;
ts->vref_mv = pdata->vref_mv; - ts->swap_xy = pdata->swap_xy;
if (pdata->filter != NULL) { if (pdata->filter_init != NULL) { @@ -1355,18 +1376,35 @@ static int ads7846_probe(struct spi_device *spi) input_dev->dev.parent = &spi->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | + BIT_MASK(ABS_PRESSURE); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + ts->x_min = pdata->x_min ? : 0; + ts->x_max = pdata->x_max ? : MAX_12BIT; + ts->y_min = pdata->y_min ? : 0; + ts->y_max = pdata->y_max ? : MAX_12BIT; + input_set_abs_params(input_dev, ABS_X, - pdata->x_min ? : 0, - pdata->x_max ? : MAX_12BIT, + ts->x_min, + ts->x_max, 0, 0); input_set_abs_params(input_dev, ABS_Y, - pdata->y_min ? : 0, - pdata->y_max ? : MAX_12BIT, + ts->y_min, + ts->y_max, 0, 0); input_set_abs_params(input_dev, ABS_PRESSURE, pdata->pressure_min, pdata->pressure_max, 0, 0);
+ if (spi->dev.of_node) { + input_abs_set_min(input_dev, ABS_X, 0); + input_abs_set_min(input_dev, ABS_Y, 0); + + touchscreen_parse_properties(ts->input, false, &ts->prop); + } + + ts->prop.swap_x_y |= pdata->swap_xy; + ads7846_setup_spi_msg(ts, pdata);
ts->reg = regulator_get(&spi->dev, "vcc");
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (100%)
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt similarity index 100% rename from Documentation/devicetree/bindings/input/ads7846.txt rename to Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
On Fri, Nov 11, 2016 at 08:02:04PM +0100, H. Nikolaus Schaller wrote:
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/devicetree/bindings/input/{ => touchscreen}/ads7846.txt (100%)
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt similarity index 100% rename from Documentation/devicetree/bindings/input/ads7846.txt rename to Documentation/devicetree/bindings/input/touchscreen/ads7846.txt -- 2.7.3
Acked-by: Rob Herring robh@kernel.org
Fix module table so that the driver is loaded if compiled as module and requested by DT.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/input/touchscreen/ads7846.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 400e421..50c85d2 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1532,6 +1532,16 @@ static int ads7846_remove(struct spi_device *spi) return 0; }
+static const struct spi_device_id ads7846_idtable[] = { + { "tsc2046", 0 }, + { "ads7843", 0 }, + { "ads7845", 0 }, + { "ads7846", 0 }, + { "ads7873", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ads7846_idtable); + static struct spi_driver ads7846_driver = { .driver = { .name = "ads7846", @@ -1546,4 +1556,3 @@ module_spi_driver(ads7846_driver);
MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:ads7846");
The standard touch screen bindings [1] replace the private ti,swap-xy with touchscreen-swaped-x-y. And for the Openpandora we use touchscreen-size etc. to match the LCD screen size.
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Tested with OpenPandora.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 17 +++++++++++++---- arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 3 ++- 3 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index fa611a5..b8b3864 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -325,7 +325,7 @@ ti,y-max = /bits/ 16 <3600>; ti,x-plate-ohms = /bits/ 16 <80>; ti,pressure-max = /bits/ 16 <255>; - ti,swap-xy; + touchscreen-swapped-x-y;
wakeup-source; }; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index b0d1551..d12008a 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -700,10 +700,19 @@ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>;
- ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <8000>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <4800>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <16>; + touchscreen-fuzz-y = <16>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + + ti,x-min = /bits/ 16 <160>; + ti,x-max = /bits/ 16 <3900>; + ti,y-min = /bits/ 16 <220>; + ti,y-max = /bits/ 16 <3750>; ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>;
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index 157345b..3627a63 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -66,6 +66,7 @@ ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; ti,swap-xy; - wakeup-source; + touchscreen-swapped-x-y; + linux,wakeup; }; };
* H. Nikolaus Schaller hns@goldelico.com [161111 11:03]:
The standard touch screen bindings [1] replace the private ti,swap-xy with touchscreen-swaped-x-y. And for the Openpandora we use touchscreen-size etc. to match the LCD screen size.
This one should not cause conflicts, so please feel free to merge along with the driver changes:
Acked-by: Tony Lindgren tony@atomide.com
-
Dmitry Torokhov -
H. Nikolaus Schaller -
Jonathan Cameron -
Jonathan Cameron -
Rob Herring -
Tony Lindgren