On Wed, 19 Sep 2018 11:18:18 +0200 "H. Nikolaus Schaller" hns@goldelico.com wrote:
Hi Andreas,
Am 18.09.2018 um 21:34 schrieb Andreas Kemnade andreas@kemnade.info:
Hi,
On Tue, 18 Sep 2018 08:30:58 +0200 H. Nikolaus Schaller hns@goldelico.com wrote:
Hi all, I have finally updated our kernel trees to
letux-4.14.70 letux-4.18.8 letux-4.19-rc4
and as usual there are binaries and sources at the known locations.
Regarding 4.19-rc4 we have quite some construction sites, unfortunately with some regressions.
Here is the list of (significantly) broken things that I am aware of:
Pyra:
- OMAP5 TILER is no longer scanning through the frame buffer and appears to fetch from a fixed address
- "reboot" hangs if timer8 is in use
- bq2429x charger driver is far from being perfect (sometimes does not detect USB unplug/replug and charging does not start)
- AESS does not load firmware and even without, audio is broken
- PVR/SGX integration is missing
- sd/eMMC switch driver is missing
GTA04:
- camera driver is still not stable and incomplete
- PVR/SGX integration is incomplete
suspend works catastrophically at least on GTA04A5, totally unreliably. Do not know yet why.
Well, I might have mixed up something during manually fixing rebase conflicts...
Can you be a little more specific?
Well, I am still collecting and verifying (double checking things I have done). What I have seen: - 10mA too much power consumption if no modules loaded
- is it not going to suspend?
per and core power domains do not enter suspend state noirq suspend failed
on letux3704 that happens after loading camera modules, but also after other things I have not figured out. Running udev is enough. musb + phy + charging stuff considered not gulthy at first glance.
- does it not wake up again?
that also happened (or did it crash?)
- does it suspend but suspend power is too high?
not measured yet
will give more structured input soon.
Regards, Andreas