Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup.
Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function.
The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Cc: stable@vger.kernel.org # 4.7.0 --- drivers/mmc/host/omap_hsmmc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 952fa4063ff8..03ba80bcf319 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1512,6 +1512,27 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
if (mmc_pdata(host)->init_card) mmc_pdata(host)->init_card(card); + else if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + struct device_node *np = mmc_dev(mmc)->of_node; + + np = of_get_compatible_child(np, "ti,wl1251"); + if (np) { + /* + * We have TI wl1251 attached to MMC3. Pass this information to + * SDIO core because it can't be probed by normal methods. + */ + + dev_info(host->dev, "found wl1251\n"); + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 24000000; + card->ocr = 0x80; + of_node_put(np); + } + } }
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)