Am Thu, 15 Sep 2016 23:08:11 +0200 hat aTc atc@k-n-p.org geschrieben:
Hi,
well, I tested this unit with the Non-Tiler SD Card I created with you and zmatt together via IRC, so that one should work.
I should've probably included it, but I can also upload you an image, if you like.
Yes, booting it can be quite horrible sometimes... some experiences I made:
* Often, if it doesn't want to boot, an fsck on both partitions on a normal PC helps.
* It also seems to hang if it can't connect to the display board properly - so if the flex cable is not properly inserted, it could also hang.
And as Tony also confirmed: Current kernels seem to be unstable with both the EVM and the Pyra. Something bad has been going on there...
since i've been having quite some problems getting the pyra to run without locking up constantly, could you give me a link (or a working makesd config) to a known working SD card image for my pyra prototype.
I did try making one with the makesd script, but all the "latest" links seems to have been last updated 5 months ago, and I get an image with a 4.6.0 kernel. I also don't know which .dtb to use on this one, since there are quite a few to choose from, and i'm also not sure about which lcd panel config this one needs.
That way i'd at least know if the problems i'm seeing are just part of the prototype, or part of my messing about with kernels/u-boot/xorg configs/etc. _______________________________________________ Kernel mailing list Kernel@pyra-handheld.com http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel