Okay... Now we have a bit of a problem.
Apparently,.as the memory was basically working but just freezing (we we thought was a software issue), we've ordered the memory already - we have 4000 of those chips in stock.
I'm now trying to find our whether we can exchange them (they're still untouched and sealed), but this might not work...
What downsides do we.have with DDR3 memory? How much more power.do they consume? How much more.heat do they produce?
Are there any other downsides?
On August 16, 2017 2:29:37 AM GMT+02:00, Michael Mrozek EvilDragon@openpandora.org wrote:
On Di, 2017-08-15 at 17:00 -0700, Tony Lindgren wrote:
I just checked the part number on the 4GB RAM chips - and indeed, it is the K4B8G1646D, which means we have the DDR3 and NOT the DDR3L version (which would be K4B8G1646Q).
That's the reason we need 1.5V here. So we got the wrong memory chips for our use case!
I'll check back with what we ordered and what we received.
- Tony Lindgren tony@atomide.com [170815 16:57]:
Somehow we need 1.50V for the 4GB DDR3 to work reliably. No idea so far why this is though.
And here's the related kernel dts change for 1.50V.
Tony
8< -----------------------
From tony Mon Sep 17 00:00:00 2001 From: Tony Lindgren tony@atomide.com Date: Tue, 15 Aug 2017 13:06:47 -0700 Subject: [PATCH] ARM: dts: Fix up DDR3 voltage for pyra 4G
Looks like we need 1.50V instead of 1.35V for pyra-4g DDR3 to work reliably. Note that this needs to match the voltage configured by the bootloader.
When testing memory with two instances of memtester 1900M for example, make sure ti-soc-thermal and thermal-generic-adc modules are loaded. You may also need to use a proper heat sink on the CPU board.
arch/arm/boot/dts/pyra-mainboard-v5.0.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/pyra-mainboard-v5.0.dtsi b/arch/arm/boot/dts/pyra-mainboard-v5.0.dtsi --- a/arch/arm/boot/dts/pyra-mainboard-v5.0.dtsi +++ b/arch/arm/boot/dts/pyra-mainboard-v5.0.dtsi @@ -816,6 +816,12 @@ vbus-supply = <&otg_reg>; };
+/* pyra-4g memory needs 1.50V instead of 1.35V somehow */ +&smps6_reg {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+};
&smps10_out1_reg { /* never turn on or it may burn the Palmas! */ status = "disabled";
-- Mit freundlichen Grüßen,
Michael Mrozek
OpenPandora GmbH Geschäftsführer: Michael Mrozek
Schäffbräustr. 11 85049 Ingolstadt Deutschland Tel.: 0841 / 990 5548 http://www.openpandora.de/ HRB 4879, Amtsgericht Ingolstadt
eMail: mrozek@openpandora.org _______________________________________________ Kernel mailing list Kernel@pyra-handheld.com http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel