Am 09.11.2016 um 14:49 schrieb Michael Mrozek EvilDragon@openpandora.org:
Am Wed, 9 Nov 2016 14:41:20 +0100 hat Matthijs van Duin matthijsvanduin@gmail.com geschrieben:
Hi,
- we need a SD shaped hardware adapter to get the JTAG signals to a
probe
This, however, is the tricky part. It would have to be custom made since the (already obscure) NIDnT interface is based on micro-SD. maybe with level-shifters (I don't know)
AFAIK, we still have the possibility to solder a Micro-SD-Slot directly to the CPU board, so that should work.
Ah, you are right! I have been working on that for a too long time to remember such details :)
There are 8 unused solder pads on the battery oriented side of the CPU board where exactly those shared pins are available we need :)
Otherwise, if custom made, it should be easy to rip an SD->Micro-SD adapter apart and solder a small PCB to the traces.
Something like
http://www.camerahacker.com/Digital/Inside_miniSD_Adapter.shtml
A problem is that these contact pins are not very stable unless sealed inside the adapter.
I would simply make an 1.6mm PCB having the standard SD card shape and contact pads at the right locations. Similar to this:
http://downloads.qi-hardware.com/people/werner/wpan/web/800px-Atben_atusb_pr...
BR, Nikolaus