Changes V5 suggested by Jacek Anaszewski: * update macros/function for audio gain * mention PWM in bindings
2016-07-19 10:03:40: Changes V4 (mostly fixed by Andrey Utkin): * Fix struct is31fl319x_driver alignment * Rework chip matching as suggested by Jacek Anaszewski * Enhance macro-constants names * Traverse cdef.num_leds, not MAX_LEDS * Fix some checkpatch --strict notices * Fixup for MAX_LEDS -> cdef->num_leds * Fix lots of review notices - macrodef for bits shift - drop dev_err() on parse_dt() fail (thus inside parse_dt() every failure must give a proper message) - of_node_put() where needed - rework is31fl319x_microamp_to_cs() - destroy mutex properly * remove note that it is based on tca6507 driver (has deviated completely) (fixed by hns) * reject if any led current < current_min (fixed by hns) * simplify helper function is31fl319x_microamp_to_cs and round down (fixed by hns) * Drop extra empty line in Documentation/devicetree/bindings/leds/is31fl319x.txt * remove led-max-microamps global property in bindings documentation (fixed by hns)
2016-07-08 21:49:42: Changes V3 (mostly done by Andrey Utkin): * general coding style improvements * added a mutex to properly serialize multiple calls to set_backlight * use regmap defaults (suggested by Jacek Anaszewski) * improve DT parsing (suggested by Jacek Anaszewski) * define dependency on REGMAP_I2C * minor code improvements
2016-07-06 12:02:47: Changes V2: * suggested by David Rivshin * add more "compatible" strings for other chip variants/brands * renumber output <reg> values to expect a range of 1..9 * fixes for typos and DT example, Kconfig message * fix location in Makefile and Kconfig * remove some dead/not implemented code * use of_property_read_string for better error handling * coding style improvements * use devm_led_classdev_register and simplify error path * suggested by Jacek Anaszewski * fix more typos & writing style * separate bindings document into a second patch * max current property renamed and define uA instead of mA * debugging message improvements * remove platform data and header file completely and therefore require DT * use regmap to handle caching and locking + i2c serialization * suggested by Rob Herring * bindings documentation style improvements
V1: 2016-04-18 20:43:18: This patch adds a driver for the is31fl3196/99 dimmable dual/triple rgb controller chips from ISSI.
H. Nikolaus Schaller (2): led: is31fl319x: 1/3/6/9-channel light effect led driver Bindings documentation for ISSI is31fl319x driver
.../devicetree/bindings/leds/is31fl319x.txt | 59 +++ drivers/leds/Kconfig | 12 + drivers/leds/Makefile | 1 + drivers/leds/leds-is31fl319x.c | 448 +++++++++++++++++++++ 4 files changed, 520 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/is31fl319x.txt create mode 100644 drivers/leds/leds-is31fl319x.c