Remove handling of this property from code. Note that wl->power_gpio is still needed in the header file for SPI mode (N900).
Suggested by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/net/wireless/ti/wl1251/sdio.c | 30 --------------------------- 1 file changed, 30 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c index df0c20a555e3..82446196f9a8 100644 --- a/drivers/net/wireless/ti/wl1251/sdio.c +++ b/drivers/net/wireless/ti/wl1251/sdio.c @@ -15,9 +15,7 @@ #include <linux/wl12xx.h> #include <linux/irq.h> #include <linux/pm_runtime.h> -#include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h>
#include "wl1251.h" @@ -162,15 +160,6 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable) printk("%s %d\n", __func__, enable);
if (enable) { - /* - * Power is controlled by runtime PM, but we still call board - * callback in case it wants to do any additional setup, - * for example enabling clock buffer for the module. - */ - if (gpio_is_valid(wl->power_gpio)) - gpio_set_value(wl->power_gpio, true); - - ret = pm_runtime_get_sync(&func->dev); if (ret < 0) { pm_runtime_put_sync(&func->dev); @@ -188,9 +177,6 @@ printk("%s %d\n", __func__, enable); ret = pm_runtime_put_sync(&func->dev); if (ret < 0) goto out; - - if (gpio_is_valid(wl->power_gpio)) - gpio_set_value(wl->power_gpio, false); }
out: @@ -245,27 +231,11 @@ printk("%s: of=%pOFcC\n", __func__, np);
wl1251_board_data = wl1251_get_platform_data(); if (!IS_ERR(wl1251_board_data)) { - wl->power_gpio = wl1251_board_data->power_gpio; wl->irq = wl1251_board_data->irq; wl->use_eeprom = wl1251_board_data->use_eeprom; } else if (np) { wl->use_eeprom =of_property_read_bool(np, "ti,wl1251-has-eeprom"); - wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0); wl->irq = of_irq_get(np, 0); - - if (wl->power_gpio == -EPROBE_DEFER || wl->irq == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto disable; - } - } - - if (gpio_is_valid(wl->power_gpio)) { - ret = devm_gpio_request(&func->dev, wl->power_gpio, - "wl1251 power"); - if (ret) { - wl1251_error("Failed to request gpio: %d\n", ret); - goto disable; - } }
if (wl->irq) {