Hi Tony,
Am 17.11.2017 um 18:08 schrieb Tony Lindgren tony@atomide.com:
- H. Nikolaus Schaller hns@goldelico.com [171115 21:41]:
GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3 processor. A GPIO can pulse the on/off toggle switch.
The VSIM regulator is used to power on/off the LNA of an external active GPS antenna so that a driver can turn the LNA off if GPS is not needed to save battery energy.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4504908c23fe..e967d738aaaf 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -477,6 +477,12 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>;
- gps: gps {
compatible = "wi2wi,w2sg0004";lna-supply = <&vsim>; /* LNA regulator */enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* GPIO_145: trigger for turning on/off w2sg0004 */- };
};
How about move the comment above the node to avoid long lines? Or just change it to gpio_145 for the comment as the property is already enable-gpios?
Regards,
Tony
Done so that it will be included in next version.
BR and thanks, Nikolaus