Am 08.10.2019 um 22:15 schrieb H. Nikolaus Schaller hns@goldelico.com:
Am 08.10.2019 um 10:00 schrieb Tero Kristo t-kristo@ti.com:
On 07/10/2019 22:24, H. Nikolaus Schaller wrote:
Hi Tero,
Am 07.10.2019 um 21:18 schrieb Tero Kristo t-kristo@ti.com:
On 07/10/2019 18:52, Tony Lindgren wrote:
Hi,
- H. Nikolaus Schaller hns@goldelico.com [191005 16:59]:
Please try with Tero's current github branch at github.com/t-kristo/linux-pm.git 5.4-rc1-ipc from few days ago, the earlier versions had still issues.
Yeah, this one should be fixed now.
Ok! Will try asap.
- OMAP5 (Pyra): fails to enable the clocks (did work with the previous version)
[ 304.140363] clock-controller:clk:0000:0: failed to enable [ 304.147388] PVR_K:(Error): EnableSGXClocks: pm_runtime_get_sync failed (16)
Hmm no idea what might be up with this one. Did some clkctrl clock fixes maybe cause a regression here? Tero do you have any ideas?
So, this one I am not too sure, I haven't looked at omap5 graphics clocking. I don't think it has anything to do with reset handling though.
Is there some simple way to try this out on board; without PVR module that is?
Yes, I have also seen it when just running the commands in the original commit message [1]: # echo on > $(find /sys -name control | grep /5600) # rwmem 0x5600fe00 # OCP Revision 0x5600fe00 = 0x40000000 # echo auto > $(find /sys -name control | grep /5600) # rwmem 0x5600fe10 # rwmem 0x56000024 But I have not yet tested with 5.4-rc2, just 5.4-rc1.
Ok, there is a one liner DTS data fix for this issue, attached.
Yes, have tested and it fixes omap5. I have the 3D demo running again on the Pyra. Yay!
Together with the latest rstcrtl patches, am335x is now better. No omap_reset_deassert: timedout waiting for gfx:0 any more.
But I can't access the sgx registers and get memory faults. Maybe my script has a bug and is trying the wrong address. Have to check with some distance...
Now I have done more tests on am335x. It is not my script but something else.
Trying to read 0x5600fe00 after doing
echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control
gives page faults.
When trying to load the kernel driver, the omap_reset_deassert message has gone but the driver does no initialize:
root@letux:~# modprobe pvrsrvkm_omap_am335x_sgx530_125 [ 45.774712] pvrsrvkm_omap_am335x_sgx530_125: module is from the staging directory, the quality is unknown, you have been warned. root@letux:~#
Here is the CM/PM register dump after enabling power/control
*** SGX Register Dump *** 0x44E00900 00000301 CM_GFX_L3_CLKSTCTRL 0x44E00904 00050000 CM_GFX_GFX_CLKCTRL 0x44E0090c 00000002 CM_GFX_L4LS_GFX_CLKSTCTR 0x44E00910 00030000 CM_GFX_MMUCFG_CLKCTRL 0x44E00914 00030000 CM_GFX_MMUDATA_CLKCTRL 0x44E0052c 00000000 CM_DPLL.CLKSEL_GFX_FCLK 0x44E01100 00060047 PM_GFX_PWRSTCTRL 0x44E01104 00000001 RM_GFX_RSTCTRL 0x44E01110 00000037 PM_GFX_PWRSTST
BR, Nikolaus