Hi,
On Mon, Jan 7, 2019 at 2:19 PM H. Nikolaus Schaller hns@goldelico.com wrote:
Hi Andreas,
Am 05.01.2019 um 19:48 schrieb Andreas Kemnade andreas@kemnade.info:
Hi,
On Sat, 5 Jan 2019 08:21:40 +0100 "H. Nikolaus Schaller" hns@goldelico.com wrote:
Hi Andreas,
Am 04.01.2019 um 20:27 schrieb Andreas Kemnade andreas@kemnade.info:
Hi,
On Fri, 4 Jan 2019 14:45:47 +0100 "H. Nikolaus Schaller" hns@goldelico.com wrote:
Hi, with help and suggestions from Mark, I finally managed to get our Letux kernel compile and boot on the Raspi3B+.
Do you add -@ to DTC_FLAGS to make handling dtb overlays easier?
You mean something like:
https://github.com/beagleboard/meta-beagleboard/blob/master/common-bsp/recip...
yes.
No, since mainline kernel seems not to build or need any overlays for RasPi and I am not (yet) aiming at shield/hat/capes. Just a "PC" like setup (monitor, keyboard, LAN).
Hmm, for a PC-like setup I would choose a standard debian. For a RasPi with e.g. touchscreen hat I would be happy to just use a letux system. And remember, someone presented a raspi phone at Fosdem in that restaurant.
There seems to be a Raspi Touchscreen driver in 5.0-rc1:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
This means, letux-5.0 will have it without doing much...
Well, we still have to get it booting with console :)
IIRc to have console enabled you need to add enable_uart=1 to config.txt file and console should work
BR, Nikolaus
BR, marek
http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel