Re: [PATCH v9 8/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature

Am 17.02.2017 um 22:27 schrieb Dmitry Torokhov dmitry.torokhov@gmail.com:

On Fri, Dec 30, 2016 at 08:36:30PM +0000, Jonathan Cameron wrote:

...

On 28/12/16 14:53, H. Nikolaus Schaller wrote:

...

The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.

Additionally it can measure the chip temperature.

This extension provides an iio interface for these adc channels.

Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.

This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff

Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y or =m in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.

Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Reviewed-by: Jonathan Cameron jic23@kernel.org

Just for the record, I'm happy with the few changes from earlier versions.

I untangled this from the rest of the patches (as it turned out to be the least controversial ;) ) and applied with some minor changes (see below). Please take a look at my tsc2007 branch on kernel.org to see if I missed anything.

Looks good!

BR and thanks, Nikolaus

Thanks.

...

Jonathan

...

---

drivers/input/touchscreen/Kconfig | 10 ++ drivers/input/touchscreen/Makefile | 2 + drivers/input/touchscreen/tsc2007.h | 116 ++++++++++++++++ .../touchscreen/{tsc2007.c => tsc2007_core.c} | 95 +++---------- drivers/input/touchscreen/tsc2007_iio.c | 150 +++++++++++++++++++++ 5 files changed, 299 insertions(+), 74 deletions(-) create mode 100644 drivers/input/touchscreen/tsc2007.h rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c} (86%) create mode 100644 drivers/input/touchscreen/tsc2007_iio.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index efca013..1616a8d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1035,6 +1035,16 @@ config TOUCHSCREEN_TSC2007 To compile this driver as a module, choose M here: the module will be called tsc2007.

+config TOUCHSCREEN_TSC2007_IIO

• bool "IIO interface for external ADC input and temperature"
• depends on TOUCHSCREEN_TSC2007
• depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
• help

•  Saying Y here adds an iio interface to the tsc2007 which
  

•  provides values for the AUX input (used for e.g. battery
  

•  or ambient light monitoring), temperature and raw input
  

•  values.
  

config TOUCHSCREEN_W90X900 tristate "W90P910 touchscreen driver" depends on ARCH_W90X900 diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..05d1cc8 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 0000000..16efb60 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,116 @@ +/*

• • Copyright (c) 2008 MtekVision Co., Ltd.
• • Kwangwoo Lee kwlee@mtekvision.com
• • Using code from:
• • • ads7846.c
• • Copyright (c) 2005 David Brownell
• • Copyright (c) 2006 Nokia Corporation
• • • corgi_ts.c
• • Copyright (C) 2004-2005 Richard Purdie
• • • omap_ts.[hc], ads7846.h, ts_osk.c
• • Copyright (C) 2002 MontaVista Software
• • Copyright (C) 2004 Texas Instruments
• • Copyright (C) 2005 Dirk Behme
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#include <linux/input/touchscreen.h>

+#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4)

+#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)

+#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1)

+#define MAX_12BIT ((1 << 12) - 1)

+#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)

+#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)

+struct ts_event {

• u16 x;
• u16 y;
• u16 z1, z2;

+};

+struct tsc2007 {

• struct input_dev *input;
• char phys[32];
• struct i2c_client *client;
• u16 model;
• u16 x_plate_ohms;
• struct touchscreen_properties prop;
• bool report_resistance;
• u16 min_x;
• u16 min_y;
• u16 max_x;
• u16 max_y;
• u16 max_rt;
• unsigned long poll_period; /* in jiffies */
• int fuzzx;
• int fuzzy;
• int fuzzz;
• unsigned int gpio;
• int irq;
• wait_queue_head_t wait;
• bool stopped;
• bool pendown;
• int (*get_pendown_state)(struct device *);
• void (*clear_penirq)(void);
• struct mutex mlock;
• struct iio_dev *iio_dev; /* optional */

+};

+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,

• 			struct ts_event *tc);
  

+bool tsc2007_is_pen_down(struct tsc2007 *ts);

+#if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2007_IIO)

+/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +void tsc2007_iio_unconfigure(struct tsc2007 *ts);

+#else /* CONFIG_TOUCHSCREEN_TSC2007_IIO */

+static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{

• return 0;

+} +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{ +}

+#endif /* CONFIG_TOUCHSCREEN_TSC2007_IIO */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c similarity index 86% rename from drivers/input/touchscreen/tsc2007.c rename to drivers/input/touchscreen/tsc2007_core.c index 76b462b..812ded8 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,79 +27,11 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> -#include <linux/input/touchscreen.h>

-#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4)

-#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)

-#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1)

-#define MAX_12BIT ((1 << 12) - 1)

-#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)

-#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)

-struct ts_event {

• u16 x;
• u16 y;
• u16 z1, z2;

-};

-struct tsc2007 {

• struct input_dev *input;
• char phys[32];
• struct i2c_client *client;
• u16 model;
• u16 x_plate_ohms;
• struct touchscreen_properties prop;
• bool report_resistance;
• u16 min_x;
• u16 min_y;
• u16 max_x;
• u16 max_y;
• u16 max_rt;
• unsigned long poll_period; /* in jiffies */
• int fuzzx;
• int fuzzy;
• int fuzzz;
• unsigned gpio;
• int irq;
• wait_queue_head_t wait;
• bool stopped;

+#include "tsc2007.h"

• int (*get_pendown_state)(struct device *);
• void (*clear_penirq)(void);

-};

-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -137,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); }

-static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,

Kept as tsc2007_calculate_resistance for now.

...

...

+u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -158,7 +90,7 @@ static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, return rt; }

-static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -191,7 +123,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) {

/* pen is down, continue with the measurement */

• mutex_lock(&ts->mlock);
  

  tsc2007_read_values(ts, &tc);

• mutex_unlock(&ts->mlock);
  
  

  rt = tsc2007_calculate_resistance(ts, &tc);

@@ -441,7 +376,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) {

• const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);

• const struct tsc2007_platform_data *pdata =

• dev_get_platdata(&client->dev);
  

  struct tsc2007 *ts; struct input_dev *input_dev; int err;

@@ -463,7 +399,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev;

• init_waitqueue_head(&ts->wait);

• mutex_init(&ts->mlock);

  snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev));

@@ -534,7 +472,7 @@ static int tsc2007_probe(struct i2c_client *client, if (err < 0) { dev_err(&client->dev, "Failed to setup chip: %d\n", err);

• return err;	/* usually, chip does not respond */
  

• return err;	/* chip does not respond */
  

  }

  err = input_register_device(input_dev);

@@ -544,6 +482,14 @@ static int tsc2007_probe(struct i2c_client *client, return err; }

• return tsc2007_iio_configure(ts);

+}

+static int tsc2007_remove(struct i2c_client *client) +{

• struct tsc2007 *ts = i2c_get_clientdata(client);
• tsc2007_iio_unconfigure(ts); return 0;

}

@@ -569,6 +515,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe,

• .remove = tsc2007_remove,

};

module_i2c_driver(tsc2007_driver); diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 0000000..ed79944 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,150 @@ +/*

• • Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
• • Nikolaus Schaller hns@goldelico.com
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h"

+struct tsc2007_iio {

• struct tsc2007 *ts;

+};

+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \

• .datasheet_name = _name, \
• .type = _type, \
• .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \

• 	BIT(_chan_info), \
  

• .indexed = 1, \
• .channel = _chan, \

+}

+static const struct iio_chan_spec tsc2007_iio_channel[] = {

• TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
• TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
• TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),

+};

+static int tsc2007_read_raw(struct iio_dev *indio_dev,

• struct iio_chan_spec const *chan, int *val, int *val2, long mask)

+{

• struct tsc2007_iio *iio = iio_priv(indio_dev);
• struct tsc2007 *tsc = iio->ts;
• int adc_chan = chan->channel;
• int ret = 0;
• if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))

• return -EINVAL;
  

• if (mask != IIO_CHAN_INFO_RAW)

• return -EINVAL;
  

• mutex_lock(&tsc->mlock);
• switch (chan->channel) {
• case 0:

• *val = tsc2007_xfer(tsc, READ_X);
  

• break;
  

• case 1:

• *val = tsc2007_xfer(tsc, READ_Y);
  

• break;
  

• case 2:

• *val = tsc2007_xfer(tsc, READ_Z1);
  

• break;
  

• case 3:

• *val = tsc2007_xfer(tsc, READ_Z2);
  

• break;
  

• case 4:

• *val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));
  

• break;
  

• case 5: {

• struct ts_event tc;
  

• tc.x = tsc2007_xfer(tsc, READ_X);
  

• tc.z1 = tsc2007_xfer(tsc, READ_Z1);
  

• tc.z2 = tsc2007_xfer(tsc, READ_Z2);
  

• *val = tsc2007_calculate_resistance(tsc, &tc);
  

• break;
  

• }
• case 6:

• *val = tsc2007_is_pen_down(tsc);
  

• break;
  

• case 7:

• *val = tsc2007_xfer(tsc,
  

• 		    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));
  

• break;
  

• case 8:

• *val = tsc2007_xfer(tsc,
  

• 		    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));
  

• break;
  

• }
• /* Prepare for next touch reading - power down ADC, enable PENIRQ */
• tsc2007_xfer(tsc, PWRDOWN);
• mutex_unlock(&tsc->mlock);
• ret = IIO_VAL_INT;
• return ret;

+}

+static const struct iio_info tsc2007_iio_info = {

• .read_raw = tsc2007_read_raw,
• .driver_module = THIS_MODULE,

+};

+int tsc2007_iio_configure(struct tsc2007 *ts) +{

• int err;
• struct iio_dev *indio_dev;
• struct tsc2007_iio *iio;
• indio_dev = devm_iio_device_alloc(&ts->client->dev,

• sizeof(struct tsc2007_iio));
  

• if (!indio_dev) {

• dev_err(&ts->client->dev, "iio_device_alloc failed\n");
  

• return -ENOMEM;
  

• }
• iio = iio_priv(indio_dev);
• iio->ts = ts;
• ts->iio_dev = (void *) indio_dev;
• indio_dev->name = "tsc2007";
• indio_dev->dev.parent = &ts->client->dev;
• indio_dev->info = &tsc2007_iio_info;
• indio_dev->modes = INDIO_DIRECT_MODE;
• indio_dev->channels = tsc2007_iio_channel;
• indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
• err = iio_device_register(indio_dev);

Changed this to devm.

...

...

• if (err < 0) {

• dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",
  

• 	err);
  

• return err;
  

• }
• return 0;

+} +EXPORT_SYMBOL(tsc2007_iio_configure);

This is not a separate module, there is no need to export this symbol.

...

...

+void tsc2007_iio_unconfigure(struct tsc2007 *ts) +{

• struct iio_dev *indio_dev = ts->iio_dev;
• iio_device_unregister(indio_dev);

+} +EXPORT_SYMBOL(tsc2007_iio_unconfigure);

Dropped this as not needed with devm.

-- Dmitry