Am 07.10.2019 um 20:44 schrieb H. Nikolaus Schaller hns@goldelico.com:

KVERSION: 5.4-rc2 CONFIGS: arch/arm/configs/letux_defconfig arch/arm/configs/letux_lpae_defconfig arch/mips/configs/letux_defconfig

Infos

Project Home: http://projects.goldelico.com/p/gta04-kernel/ Issues: http://projects.goldelico.com/p/gta04-kernel/issues/

Downloads

git: http://git.goldelico.com/?p=letux-kernel.git;a=shortlog;h=refs/heads/letux-5... ARM: http://download.goldelico.com/letux-kernel/letux-5.4-rc2 ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.4-rc2-lpae MIPS: http://download.goldelico.com/letux-kernel/letux-5.4-rc2-l400

recent CHANGES (http://download.goldelico.com/letux-kernel/letux-5.4-rc2/src/CHANGES)

unfixed bugs from memory: * gta04 and openpandora spi panel drivers not loaded automatically (fix has been posted on LKML and will come in letux-5.4-rc4) * pvr/sgx no longer working for omap5 (and still not yet for all others) * audio completely broken for omap5 (except letux/pyra-minimal which does not try to enable AESS) * tiler-fbdev setup broken (omap5) * openpandora wifi * omap5 freeze on "reboot" (on some boards) * RasPi 3 does not wake up some HDMI monitor on xset dpms force on

plus more in http://projects.goldelico.com/p/gta04-kernel/issues/

letux-5.4-rc2 Mo 7 Okt 2019 19:11:52 CEST:

• fix for sgxdump to better detect/handle omap3430 and omap3630 (and others)
• Letux/rootfs: add ip-forwarding.sh script to setup host where a LetuxOS device is connected to
• apply upstream fix for boot issue (__always_inlineand OPTIMIZE_FOR_SIZE)
• fix for Letux 3704/Letux 7004 panel (display timing in DTS)

letux-5.4-rc1 Mi 2 Okt 2019 16:20:48 CEST: !!! does not completely boot on GTA04. Other platforms untested.

• compile fixes for sortextable on Darwin, extcon-gpio
• fixes merge conflicts in: letux/tsc2007-v11, letux/iio-mount-matrix-v3, letux/panels+ssd2858-v2 (panels moved to drivers/gpu/drm/panel), letux/omap-pvr-soc-glue-v3, letux/latest-pvr, letux/omap-pvr, letux/am335x-hwmon, letux/jz4730 (code likely broken now), letux/extcon-v2, letux/pyra-minimal
• letux/omap-pvr-soc-glue-v3: fixes to make omap4 version (almost) work (Pandaboard)
• pandora device tree and omap_hsmmc + mach-omap2/pdata-quirks: add (still incomplete) fix for Pandora WiFi
• Letux/rootfs: charger: increase twl4030 charging current on AC port (Pandora)
• letux/omap-pvr-soc-glue-v3: include latest sysc and reset-controller patches from linux-next and https://github.com/t-kristo/linux-pm.git
• Letux/rootfs: update sgxdump and rename gpu-demo to sgxdemo
• Letux/rootfs: new method to detect panel and set up xorg.conf
• letux/vcnl4000: change to use SELFTIMED for vcnl4010
• reinstall "libertas: disable pm_ops" otherwise we have 200mA on GTA04 in suspend

letux-5.3 Mo 16 Sep 2019 07:39:33 CEST:

• revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."
• add some new RasPi 3B+ defconfigs
• letux/omap3-opp-v4: properly control omap36xx ABB LDO for OPP1G
• letux/omap3-opp-v4: do thermal management (limit TJ to 90°C)
• RasPi: setup gpio3 as KEY_POWER
• RasPi: build drivers for WLAN
• configure for CONFIG_CRYPTO_DEV_OMAP
• fix DTS for Letux3704 and Letux7004 to handle panel backlight
• twl4030_charger: handle negative current_now
• Letux: rootfs: temperatures: also find cpu-thermal on RasPi

letux-5.1-next, letux-5.2-next:

• revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."
• add some new RasPi 3B+ defconfigs

letux-5.3-rc8:

• pyra-mainboard: invert lid sensor polarity
• letux/omap-pvr-soc-glue-v2: update to add proper sgx child nodes - works on Pyra
• letux/omap3-opp-v3: some updates by discussions on LKML
• mergefile: merge letux/omap3-opp
• letux/rootfs: make volumd do better checks; fix systemd config to use letux-panel-setup.service instead of tiler.service to make display work with Debian Stretch

letux-4.19-next, letux-5.2-next:

• pyra-mainboard: invert lid sensor polarity

letux-5.3-rc7:

• letux/omap2plus: clean up "Strange things happening with latest kernels"
• letux/omap3-opp-v2: new branch (not merged) with work in progress to support omap3 720MHz/1GHz OPPs
• letux/omap-sgx-glue: new branch (not merged) with new SOC glue for SGX from Tony

letux-5.3-rc6:

• letux/omap2plus: added "gpio: of: fix Freescale SPI CS quirk handling" to make GTA04 panel work again
• letux/omap2plus: added "regulator: twl: voltage lists for vdd1/2 on twl4030"

letux-5.3-rc5:

• letux/latest-pvr: made SGX DDK1.14 working on 5.3-rc (at least as LPAE build for OMAP5)

letux-4.19-next, letux-5.2-next:

• letux/latest-pvr: add latest SGX DDK1.14 driver and made working (at least as LPAE build for OMAP5)

letux-5.3-rc4:

• hack to revert "arm: use swiotlb for bounce buffering on LPAE configs" because it breaks omapdrm in LPAE compile
• letux/rootfs: new tool mount-boot
• letux/tiler: fixes for omap5 tiler (but still only working for 0°)
• letux/rootfs: switch /e/n/i to a better DNS server
• letux/latest-pvr: fix make clean for PVR/SGX
• letux/latest-pvr: work on Makefile so that we can build DDK1.14 for DRM

letux-4.19-next, letux-5.2-next:

• letux/rootfs: new tool mount-boot
• letux/rootfs: improve wwan script to establish data connection for PHS8/PLS8

letux/pyra-minimal:

• hack to revert "arm: use swiotlb for bounce buffering on LPAE configs" because it breaks omapdrm in LPAE compile

letux-5.3-rc3:

• add preliminary bindings documentation for bq24297
• letux/rootfs: improve wwan script to establish data connection for PHS8/PLS8
• letux/latest-pvr: fix Makefile for PVR/SGX

=== more cut off === _______________________________________________ http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list Letux-kernel@openphoenux.org http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel