[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.6.19-daveiii-pyradef-aufs (pyra@debian-buster) (gcc version 8.3.0 (Debian 8.3.0-2)) #3 SMP PREEMPT Mon Dec 14 18:23:52 CET 2020 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Pyra-Handheld-V5.3 [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb000000 [ 0.000000] OMAP4: Map 0x00000000afd00000 to (ptrval) for dram barrier [ 0.000000] On node 0 totalpages: 1043712 [ 0.000000] DMA zone: 2295 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195840 pages, LIFO batch:63 [ 0.000000] HighMem zone: 847872 pages, LIFO batch:63 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] percpu: Embedded 20 pages/cpu s50316 r8192 d23412 u81920 [ 0.000000] pcpu-alloc: s50316 r8192 d23412 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1041417 [ 0.000000] Kernel command line: root=PARTUUID=094c7470-02 console=ttyO2,115200n8 console=tty0 vram=12M omapfb.vram=0:8M,1:4M omapfb.rotate_type=0 omapdss.def_disp=lcd rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M ignore_loglevel earlyprintk drm_kms_helper.fbdev_rotation=8 drm.force_hw_rotation fastboot coherent_pool=1M twl4030_charger.allow_usb=1 fsck.repair=yes rootfstype=f2fs rootwait ignore_loglevel [ 0.000000] printk: log_buf_len: 8388608 bytes [ 0.000000] printk: early log buf free: 63724(97%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xa53bf000-0xa93bf000] (64MB) [ 0.000000] Memory: 3948708K/4174848K available (10478K kernel code, 908K rwdata, 2772K rodata, 2048K init, 269K bss, 160604K reserved, 65536K cma-reserved, 3325952K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x34/0x4f8 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns [ 0.000010] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns [ 0.000033] Switching to timer-based delay loop, resolution 162ns [ 0.000168] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000183] OMAP clocksource: 32k_counter at 32768 Hz [ 0.002028] Console: colour dummy device 80x30 [ 0.002990] printk: console [tty0] enabled [ 0.003061] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.003111] pid_max: default: 32768 minimum: 301 [ 0.003399] LSM: Security Framework initializing [ 0.003531] Yama: becoming mindful. [ 0.003713] AppArmor: AppArmor initialized [ 0.003753] TOMOYO Linux initialized [ 0.003872] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003920] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005197] CPU: Testing write buffer coherency: ok [ 0.005284] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.005743] /cpus/cpu@0 missing clock-frequency property [ 0.005803] /cpus/cpu@1 missing clock-frequency property [ 0.005838] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059701] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079705] rcu: Hierarchical SRCU implementation. [ 0.119746] smp: Bringing up secondary CPUs ... [ 0.200083] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.200097] CPU1: Spectre v2: using ICIALLU workaround [ 0.200228] smp: Brought up 1 node, 2 CPUs [ 0.200242] SMP: Total of 2 processors activated (24.57 BogoMIPS). [ 0.200259] CPU: All CPU(s) started in HYP mode. [ 0.200267] CPU: Virtualization extensions available. [ 0.200709] devtmpfs: initialized [ 0.215001] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.215456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.215487] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.216799] pinctrl core: initialized pinctrl subsystem [ 0.217623] thermal_sys: Registered thermal governor 'fair_share' [ 0.217623] thermal_sys: Registered thermal governor 'step_wise' [ 0.217645] thermal_sys: Registered thermal governor 'user_space' [ 0.218508] NET: Registered protocol family 16 [ 0.221031] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.222018] omap_hwmod: l3_main_3 using broken dt data from ocp [ 0.222842] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.235873] audit: initializing netlink subsys (disabled) [ 0.236553] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 [ 0.239962] cpuidle: using governor menu [ 0.262986] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc' [ 0.263186] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 0.263216] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.271944] No ATAGs? [ 0.272006] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.272039] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.294772] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.301025] vsys_cobra: supplied by vmain [ 0.305245] iommu: Default domain type: Translated [ 0.307436] vgaarb: loaded [ 0.308138] SCSI subsystem initialized [ 0.308454] libata version 3.00 loaded. [ 0.308962] usbcore: registered new interface driver usbfs [ 0.309054] usbcore: registered new interface driver hub [ 0.309176] usbcore: registered new device driver usb [ 0.309451] usb_phy_generic hsusb2_phy: hsusb2_phy supply vcc not found, using dummy regulator [ 0.311914] Advanced Linux Sound Architecture Driver Initialized. [ 0.312655] NetLabel: Initializing [ 0.312681] NetLabel: domain hash size = 128 [ 0.312685] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.312746] NetLabel: unlabeled traffic allowed by default [ 0.313964] clocksource: Switched to clocksource arch_sys_counter [ 0.379728] VFS: Disk quotas dquot_6.6.0 [ 0.379794] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.380423] AppArmor: AppArmor Filesystem Enabled [ 0.391584] NET: Registered protocol family 2 [ 0.392091] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.392123] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.392201] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.392336] TCP: Hash tables configured (established 8192 bind 8192) [ 0.392442] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.392489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.392702] NET: Registered protocol family 1 [ 0.393159] PCI: CLS 0 bytes, default 64 [ 0.393618] Trying to unpack rootfs image as initramfs... [ 1.245211] Freeing initrd memory: 18612K [ 1.245730] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.245913] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.248293] Initialise system trusted keyrings [ 1.248441] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.258670] zbud: loaded [ 1.265670] jitterentropy: Initialization failed with host not compliant with requirements: 2 [ 1.265691] Key type asymmetric registered [ 1.265719] Asymmetric key parser 'x509' registered [ 1.265756] bounce: pool size: 64 pages [ 1.265861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.265875] io scheduler mq-deadline registered [ 1.265902] io scheduler kyber registered [ 1.271590] OMAP GPIO hardware version 0.1 [ 1.296242] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 1.369296] GPIO line 74 (gpio8_234/msecure) hogged as output/high [ 1.397301] ti-pipe3 4a096000.phy: can't get syscon-pllreset, sata dpll won't idle [ 1.398837] pinctrl-single 4ae0c840.pinmux: 30 pins, size 60 [ 1.399500] pinctrl-single 4a002840.pinmux: 219 pins, size 438 [ 1.403644] pwm-backlight keyboard-backlight: keyboard-backlight supply power not found, using dummy regulator [ 1.403983] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 1.408917] ti_abb 4ae07cdc.regulator-abb-mpu: can't request region for resource [mem 0x4ae07cdc-0x4ae07ce3] [ 1.408956] ti_abb: probe of 4ae07cdc.regulator-abb-mpu failed with error -16 [ 1.409018] ti_abb 4ae07ce4.regulator-abb-mm: can't request region for resource [mem 0x4ae07ce4-0x4ae07ceb] [ 1.409043] ti_abb: probe of 4ae07ce4.regulator-abb-mm failed with error -16 [ 1.409504] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.412231] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 108, base_baud = 3000000) is a OMAP UART2 [ 2.371633] printk: console [ttyO2] enabled [ 2.376742] omap_uart 48068000.serial: no wakeirq for uart5 [ 2.382784] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 121, base_baud = 3000000) is a OMAP UART5 [ 2.393282] omap_uart 4806c000.serial: no wakeirq for uart1 [ 2.399342] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 122, base_baud = 3000000) is a OMAP UART1 [ 2.409426] serial serial0: tty port ttyO1 registered [ 2.414971] omap_uart 4806e000.serial: no wakeirq for uart3 [ 2.421023] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 123, base_baud = 3000000) is a OMAP UART3 [ 2.432783] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 2.433321] random: fast init done [ 2.440099] omapdss_dss 58000000.dss: 58000000.dss supply vdda_video not found, using dummy regulator [ 2.443037] random: crng init done [ 2.456546] DSS: OMAP DSS rev 6.1 [ 2.473921] brd: module loaded [ 2.482080] loop: module loaded [ 2.485445] wwan_on_off_init: wwan_on_off_init [ 2.490538] wwan_on_off_probe: wwan_on_off_probe() [ 2.497958] ahci 4a140000.sata: 4a140000.sata supply ahci not found, using dummy regulator [ 2.506777] ahci 4a140000.sata: 4a140000.sata supply phy not found, using dummy regulator [ 2.515536] ahci 4a140000.sata: 4a140000.sata supply target not found, using dummy regulator [ 2.524637] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 2.531741] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.540751] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.551669] scsi host0: ahci [ 2.555178] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 31 [ 2.564140] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.572787] libphy: Fixed MDIO Bus: probed [ 2.580660] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.586772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.593691] ehci-pci: EHCI PCI platform driver [ 2.598476] usbcore: registered new interface driver usb-storage [ 2.605414] mousedev: PS/2 mouse device common for all mice [ 2.612856] i2c /dev entries driver [ 2.616640] IR NEC protocol handler initialized [ 2.621419] IR RC5(x/sz) protocol handler initialized [ 2.626796] IR RC6 protocol handler initialized [ 2.631581] IR JVC protocol handler initialized [ 2.636385] IR Sony protocol handler initialized [ 2.641255] IR SANYO protocol handler initialized [ 2.646259] IR Sharp protocol handler initialized [ 2.651234] IR MCE Keyboard/mouse protocol handler initialized [ 2.657412] IR XMP protocol handler initialized [ 2.662189] Driver for 1-wire Dallas network protocol. [ 2.671359] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.680935] sdhci: Secure Digital Host Controller Interface driver [ 2.687499] sdhci: Copyright(c) Pierre Ossman [ 2.693026] omap_gpio 48053000.gpio: Could not set line 4 debounce to 200000 microseconds (-22) [ 2.702212] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.707125] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 2.750338] omap_gpio 48057000.gpio: Could not set line 13 debounce to 200000 microseconds (-22) [ 2.759745] omap_hsmmc 480d1000.mmc: Got CD GPIO [ 2.764712] omap_hsmmc 480d1000.mmc: Got WP GPIO [ 2.774382] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.781191] txs02612 txs02612: probe [ 2.785159] txs02612 txs02612: failed to get mmc phandle in /txs02612 node [ 2.792452] txs02612 txs02612: could not get access to host port, using manual mode [ 2.823981] txs02612_request: current=1 client=0 [ 2.854049] txs02612 txs02612: probed [ 2.858064] txs02612_request: current=0 client=1 [ 2.862978] ledtrig-cpu: registered to indicate activity on CPUs [ 2.871709] usbcore: registered new interface driver usbhid [ 2.877688] usbhid: USB HID core driver [ 2.881942] ashmem: initialized [ 2.890791] oprofile: using timer interrupt. [ 2.895475] drop_monitor: Initializing network drop monitor service [ 2.895509] ata1: SATA link down (SStatus 0 SControl 300) [ 2.902759] NET: Registered protocol family 10 [ 2.939455] Segment Routing with IPv6 [ 2.943423] mip6: Mobile IPv6 [ 2.946620] NET: Registered protocol family 17 [ 2.951327] mpls_gso: MPLS GSO support [ 2.955679] ThumbEE CPU extension supported. [ 2.960205] Registering SWP/SWPB emulation handler [ 2.965364] omap_vc_init_channel: No PMIC info for vdd_core [ 2.971244] omap_vp_init: No PMIC info for vdd_core [ 2.976443] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.982137] omap_vp_init: No PMIC info for vdd_mm [ 2.987140] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.992940] omap_vp_init: No PMIC info for vdd_mpu [ 2.998041] Power Management for TI OMAP4+ devices. [ 3.003858] Loading compiled-in X.509 certificates [ 3.012911] Loaded X.509 cert 'Build time autogenerated kernel key: 4020818a539cdd7ae890874388bde6caf4fc6257' [ 3.023896] Key type ._fscrypt registered [ 3.028145] Key type .fscrypt registered [ 3.032277] Key type fscrypt-provisioning registered [ 3.037814] AppArmor: AppArmor sha1 policy hashing enabled [ 3.064791] dmm 4e000000.dmm: initialized all PAT entries [ 3.074404] omap-iommu 4a066000.mmu: 4a066000.mmu registered [ 3.082287] bmc150_accel_i2c 2-0010: mounting matrix not found: using identity... [ 3.117617] bmc150_accel_i2c 2-0010: Error: Reading chip id [ 3.123568] bmc150_accel_i2c: probe of 2-0010 failed with error -121 [ 3.130770] bmc150_magn_i2c 2-0012: mounting matrix not found: using identity... [ 3.138857] bmc150_magn_i2c 2-0012: Failed to bring up device from suspend mode [ 3.146724] bmc150_magn_i2c: probe of 2-0012 failed with error -121 [ 3.153749] bmp280 2-0077: 2-0077 supply vddd not found, using dummy regulator [ 3.161440] bmp280 2-0077: 2-0077 supply vdda not found, using dummy regulator [ 3.180117] bmp280: probe of 2-0077 failed with error -121 [ 3.186312] bmp280 2-0076: 2-0076 supply vddd not found, using dummy regulator [ 3.193988] bmp280 2-0076: 2-0076 supply vdda not found, using dummy regulator [ 3.214610] bno055 2-0029: mounting matrix not found: using identity... [ 3.230069] bno055 2-0029: software revision id 0311 [ 3.238013] input: iio-bridge: bno055 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48060000.target-module/48060000.i2c/i2c-2/2-0029/iio:device1/input/input0 [ 3.257388] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 3.264651] palmas 0-0048: Irq flag is 0x00000008 [ 3.300694] palmas 0-0048: Muxing GPIO 3, PWM 0, LED 0 [ 3.317925] palmas-rtc 48070000.i2c:palmas@48:rtc: registered as rtc0 [ 3.330842] SMPS123: supplied by regulator-dummy [ 3.338335] SMPS45: supplied by regulator-dummy [ 3.345219] SMPS6: supplied by vsys_cobra [ 3.352046] SMPS7: supplied by vsys_cobra [ 3.358215] SMPS8: supplied by vsys_cobra [ 3.363924] SMPS9: supplied by vsys_cobra [ 3.368349] smps9: Bringing 0uV into 2100000-2100000uV [ 3.375094] SMPS10_OUT2: supplied by regulator-dummy [ 3.381991] SMPS10_OUT1: supplied by regulator-dummy [ 3.388341] LDO1: supplied by vsys_cobra [ 3.392672] ldo1: Bringing 0uV into 1800000-1800000uV [ 3.401381] LDO2: supplied by vsys_cobra [ 3.405947] ldo2: Bringing 0uV into 1800000-1800000uV [ 3.416415] ldo4: Bringing 0uV into 1800000-1800000uV [ 3.424026] LDO5: supplied by vsys_cobra [ 3.432803] LDO7: supplied by vsys_cobra [ 3.437417] ldo7: Bringing 0uV into 2000000-2000000uV [ 3.445074] LDO8: supplied by vsys_cobra [ 3.452395] LDO9: supplied by vmmcsd_fixed [ 3.460909] LDOLN: supplied by vsys_cobra [ 3.466982] LDOUSB: supplied by vsys_cobra [ 3.475779] palmas_pwrbutton 48070000.i2c:palmas@48:palmas_power_button: h/w controlled shutdown duration=8 seconds [ 3.490221] input: palmas_pwron as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-0048/48070000.i2c:palmas@48:palmas_power_button/input/input1 [ 3.516720] usb3503 0-0008: usb3503_probe [ 3.524325] usb3503 0-0008: reset gpio state 1 [ 3.529012] usb3503 0-0008: usb3503_connect [ 3.533440] usb3503 0-0008: usb3503_reset 1 [ 3.544589] usb3503 0-0008: SP_ILOCK failed (-121) [ 3.549674] usb3503 0-0008: usb3503_probe: probed in hub mode [ 3.556185] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.585024] as5013 1-0040: ID code: 0c [ 3.589632] as5013 1-0040: ID version: 0d [ 3.594392] as5013 1-0040: silicon revision: 00 [ 3.599825] as5013 1-0040: control: f1 [ 3.604006] input: nub0 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0040/input/input2 [ 3.620791] as5013 1-0040: probe 40, gpio -2, irq 0, "as5013" [ 3.627874] as5013 1-0041: ID code: 0c [ 3.632357] as5013 1-0041: ID version: 0d [ 3.637057] as5013 1-0041: silicon revision: 00 [ 3.642489] as5013 1-0041: control: f1 [ 3.646632] input: nub1 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0041/input/input3 [ 3.663454] as5013 1-0041: probe 41, gpio -2, irq 0, "as5013" [ 3.672860] input: tca8418 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0034/input/input4 [ 3.690421] bq27xxx_battery_setup [ 3.693935] bq27xxx_battery_setup: dm_regs=12fa15bf [ 3.699633] bq27xxx_battery_settings [ 3.703432] bq27xxx_battery_set_config [ 3.707418] bq27xxx_battery_unseal [ 3.721682] bq27xxx_battery_update_dm_block [ 3.726126] bq27xxx-battery 1-0055: design-capacity has 6000 [ 3.732106] bq27xxx_battery_update_dm_block [ 3.736544] bq27xxx-battery 1-0055: design-energy has 22200 [ 3.742415] bq27xxx_battery_update_dm_block [ 3.746868] bq27xxx-battery 1-0055: terminate-voltage has 3200 [ 3.753036] bq27xxx_battery_seal [ 3.764278] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 3.795382] input: TSC2007 Touchscreen as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/4807a000.target-module/4807a000.i2c/i2c-3/3-0048/input/input5 [ 3.817038] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 3.824892] vdds_1v8_main: supplied by smps7 [ 3.830202] pca953x 4-0022: using AI [ 3.860018] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.868633] omap-iommu 55082000.mmu: 55082000.mmu registered [ 3.876406] pwm-backlight keyboard-backlight: keyboard-backlight supply power not found, using dummy regulator [ 3.887362] dmtimer posted=0 [ 3.890775] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 3.900393] ldo4: supplied by vdds_1v8_main [ 3.911259] wwan_on_off_probe: wwan_on_off_probe() [ 3.917529] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 3.926882] omap_gpio 48053000.gpio: Could not set line 4 debounce to 200000 microseconds (-22) [ 3.936089] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.940981] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.980135] omap_hsmmc 480ad000.mmc: allocated mmc-pwrseq [ 4.064943] mmc3: new high speed SDXC card at address aaaa [ 4.072777] mmcblk3: mmc3:aaaa SF256 238 GiB [ 4.082491] mmcblk3: p1 [ 4.104159] omap_gpio 48057000.gpio: Could not set line 13 debounce to 200000 microseconds (-22) [ 4.113448] omap_hsmmc 480d1000.mmc: Got CD GPIO [ 4.118380] omap_hsmmc 480d1000.mmc: Got WP GPIO [ 4.129946] omap_hsmmc 480ad000.mmc: card claims to support voltages below defined range [ 4.161898] mmc4: new high speed SDIO card at address 0001 [ 4.244875] ldo3: supplied by vdds_1v8_main [ 4.249453] ldo6: supplied by vdds_1v8_main [ 4.448275] mmc5: new high speed SDXC card at address aaaa [ 4.457797] mmcblk5: mmc5:aaaa SF256 238 GiB [ 4.467906] mmcblk5: p1 [ 4.472170] bq2429x_charger 1-006b: bq2429x_parse_dt,line=1539 chg_current = 2048000 usb_input_current = 3000000 adp_input_current = 2048000 bat_volt_max = 4200000 [ 4.487673] bq2429x_charger 1-006b: found regulator-max-microvolt = 4200000 [ 4.497744] vsys: Bringing 3300000uV into 3500000-3500000uV [ 4.507530] omapdss_dss 58000000.dss: bound 58001000.dispc (ops 0xc0ca350c) [ 4.514970] omapdss_dss 58000000.dss: bound 58004000.encoder (ops 0xc0ca52d4) [ 4.523287] omap-hdmi-audio omap-hdmi-audio.1.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 4.533327] omapdss_dss 58000000.dss: bound 58040000.encoder (ops 0xc0ca6160) [ 4.542350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.549349] [drm] No driver support for vblank timestamp query. [ 4.587442] drm_setup_crtcs_fb: sw_rotations=1 [ 4.592155] drm_setup_crtcs_fb: fbcon_rotate_hint=0 [ 4.603854] ------------[ cut here ]------------ [ 4.603854] WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x254/0x374 [ 4.603862] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4WAKEUP (Idle): Data Access in User mode during Functional access [ 4.603867] Modules linked in: [ 4.603882] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.19-daveiii-pyradef-aufs #3 [ 4.603884] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 4.603888] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.603904] [] (show_stack) from [] (dump_stack+0x94/0xa8) [ 4.603915] [] (dump_stack) from [] (__warn+0xd0/0xf8) [ 4.603915] [] (__warn) from [] (warn_slowpath_fmt+0x94/0xb8) [ 4.603922] [] (warn_slowpath_fmt) from [] (l3_interrupt_handler+0x254/0x374) [ 4.603939] [] (l3_interrupt_handler) from [] (__handle_irq_event_percpu+0x58/0x29c) [ 4.603945] [] (__handle_irq_event_percpu) from [] (handle_irq_event_percpu+0x2c/0x80) [ 4.603945] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 4.603948] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xb8/0x168) [ 4.603988] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x24/0x34) [ 4.604006] [] (generic_handle_irq) from [] (__handle_domain_irq+0x5c/0xb4) [ 4.604015] [] (__handle_domain_irq) from [] (gic_handle_irq+0x3c/0x78) [ 4.604037] [] (gic_handle_irq) from [] (__irq_svc+0x58/0x8c) [ 4.604037] Exception stack(0xc1201eb8 to 0xc1201f00) [ 4.604039] 1ea0: 00000000 00000001 [ 4.604048] 1ec0: 2ec1b000 00000000 c120a168 c120a158 efc95a78 00000000 00000000 12690b17 [ 4.604056] 1ee0: 00000001 00000001 fffffff5 c1201f08 c08ff5a0 c08ff5c4 600c0013 ffffffff [ 4.604067] [] (__irq_svc) from [] (cpuidle_enter_state+0x164/0x5b8) [ 4.604067] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x28/0x38) [ 4.604072] [] (cpuidle_enter) from [] (do_idle+0x234/0x29c) [ 4.604087] [] (do_idle) from [] (cpu_startup_entry+0x18/0x20) [ 4.604098] [] (cpu_startup_entry) from [] (start_kernel+0x7cc/0x810) [ 4.604098] [] (start_kernel) from [<00000000>] (0x0) [ 4.604098] ---[ end trace faada44a88fe9901 ]--- [ 4.784701] dmtimer posted=0 [ 4.852310] Console: switching to colour frame buffer device 160x45 [ 5.497192] omapdrm omapdrm.0: fb0: omapdrmdrmfb frame buffer device [ 5.524184] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 5.537966] wwan_on_off_probe: wwan_on_off_probe() [ 5.549008] modem_vbus_hdmi_power: supplied by vsys [ 5.559878] modem_vbus_power: supplied by modem_vbus_hdmi_power [ 5.572131] wwan_on_off_probe: onoff = 99ee7faa indicator = 74aecb90 -306037184 usb_phy = -1054427720 [ 5.587679] wwan_on_off_probe: wwan_on_off_probe() wwan=5d3bcb5c [ 5.599703] wwan_on_off_is_powered_on: gpio value = 0 [ 5.610833] wwan_on_off_is_powered_on: return 'false' [ 5.622010] wwan_on_off_rfkill_set_block: blocked: 1 [ 5.632784] wwan_on_off_set_power:on = 0 [ 5.642397] wwan_on_off_is_powered_on: gpio value = 0 [ 5.653109] wwan_on_off_is_powered_on: return 'false' [ 5.663760] wwan_on_off_set_power: state 0 [ 5.673068] wwan_on_off_set_power: regulator 0 [ 5.682894] wwan_on_off_set_power: done [ 5.691931] wwan_on_off_probe: successfully probed [ 5.702635] otg_path: supplied by otg [ 5.712073] dwc3 4a030000.dwc3: Failed to get clk 'ref': -2 [ 5.724001] dwc3 4a030000.dwc3: changing max_speed on rev 5533202a [ 5.737460] input: user-buttons as /devices/platform/user-buttons/input/input6 [ 5.753581] input: pyra-game-buttons as /devices/platform/pyra-game-buttons/input/input7 [ 5.770724] input: pyra-lid-wakeup as /devices/platform/pyra-lid-wakeup/input/input8 [ 5.787966] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2021-06-09T08:44:10 UTC (1623228250) [ 5.803566] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.817660] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.829236] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.848330] l4sec_cm:clk:0038:0: failed to disable [ 5.858004] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 5.858079] ALSA device list: [ 5.878542] #0: HDMI 58040000.encoder [ 5.888613] Freeing unused kernel memory: 2048K [ 5.934847] Run /init as init process [ 5.964741] with arguments: [ 5.993349] /init [ 6.020693] earlyprintk [ 6.048220] fastboot [ 6.074818] with environment: [ 6.101940] HOME=/ [ 6.101962] TERM=linux [ 6.153231] vram=12M [ 6.270419] set_switch() to 0 [ 6.564101] drm_setup_crtcs_fb: sw_rotations=1 [ 6.573320] drm_setup_crtcs_fb: fbcon_rotate_hint=0 [ 6.872388] ehci-omap: OMAP-EHCI Host Controller driver [ 6.898775] mmc0: new high speed MMC card at address 0001 [ 6.920662] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB [ 6.933627] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB [ 6.948400] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB [ 6.962375] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (245:0) [ 6.977057] mmcblk0: p1 p2 [ 7.021151] etnaviv etnaviv: bound 59000000.bb2d (ops gpu_ops [etnaviv]) [ 7.033480] pvrsrvkm 56000000.gpu: Enabling quirks 00000000 [ 7.044283] [drm] Initialized pvr 1.14.3699939 20110701 for 56000000.gpu on minor 2 [ 7.048752] cfg80211: failed to load regulatory.db [ 7.065890] etnaviv-gpu 59000000.bb2d: model: GC320, revision: 5301 [ 7.077883] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 7.084037] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 7.100253] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 7.114047] ehci-omap 4a064c00.ehci: irq 106, io mem 0x4a064c00 [ 7.154177] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 7.170718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 [ 7.183576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.195528] usb usb1: Product: EHCI Host Controller [ 7.204562] usb usb1: Manufacturer: Linux 5.6.19-daveiii-pyradef-aufs ehci_hcd [ 7.216372] usb usb1: SerialNumber: 4a064c00.ehci [ 7.225588] hub 1-0:1.0: USB hub found [ 7.233218] hub 1-0:1.0: 3 ports detected [ 7.604098] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 7.706183] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 8.023348] process '/usr/bin/fstype' started with executable stack [ 8.119082] F2FS-fs (mmcblk0p2): recover fsync data on readonly fs [ 8.184366] F2FS-fs (mmcblk0p2): Mounted with checkpoint version = 69ac8889 [ 8.401465] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.705843] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 8.747624] systemd[1]: Inserted module 'autofs4' [ 8.791110] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.828854] systemd[1]: Detected architecture arm. [ 8.910243] systemd[1]: Set hostname to . [ 9.196383] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 9.225375] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 9.402880] systemd[1]: /lib/systemd/system/dbpd.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/dbpd.pid → /run/dbpd.pid; please update the unit file accordingly. [ 9.472594] systemd[1]: Listening on Journal Socket. [ 9.484835] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.507449] systemd[1]: Reached target User and Group Name Lookups. [ 9.526073] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.605554] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 9.818423] RPC: Registered named UNIX socket transport module. [ 9.818427] RPC: Registered udp transport module. [ 9.818432] RPC: Registered tcp transport module. [ 9.818437] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.485496] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 10.490908] systemd-journald[1854]: Received request to flush runtime journal from PID 1 [ 11.375516] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 11.553802] Bluetooth: Core ver 2.22 [ 11.585940] NET: Registered protocol family 31 [ 11.612368] Bluetooth: HCI device and connection manager initialized [ 11.638766] Bluetooth: HCI socket layer initialized [ 11.648287] bmg160_i2c 2-0069: mounting matrix not found: using identity... [ 11.660006] Bluetooth: L2CAP socket layer initialized [ 11.735293] bmg160_i2c 2-0069: Error reading reg_chip_id [ 11.748171] Bluetooth: SCO socket layer initialized [ 11.760134] bmg160_i2c: probe of 2-0069 failed with error -121 [ 11.798562] input: twl6040:vibrator as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-004b/twl6040-vibra/input/input9 [ 11.835451] ina2xx 1-004f: power monitor ina231 (Rshunt = 20000 uOhm) [ 11.936611] gpio gpiochip10: (4-0022): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 11.976978] Bluetooth: HCI UART driver ver 2.3 [ 12.064070] usb usb1-port2: Cannot enable. Maybe the USB cable is bad? [ 12.138009] input input2: as5013_open [ 12.175539] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 12.242922] input input3: as5013_open [ 12.253146] Bluetooth: HCI UART protocol H4 registered [ 12.270937] Bluetooth: HCI UART protocol BCSP registered [ 12.283694] Bluetooth: HCI UART protocol LL registered [ 12.295168] Bluetooth: HCI UART protocol Broadcom registered [ 12.323061] input input2: as5013_open [ 12.337862] input input3: as5013_open [ 12.364323] Bluetooth: hci0: change remote baud rate command in firmware [ 12.408322] gpio gpiochip10: (4-0022): unable to lock HW IRQ 14 for IRQ [ 12.421999] genirq: Failed to request resources for TS3A227E (irq 197) on irqchip 4-0022 [ 12.436770] ts3a227e 4-003b: Cannot request irq 197 (-5) [ 12.456088] ts3a227e: probe of 4-003b failed with error -5 [ 12.809976] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 12.844546] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 12.867556] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 13.155510] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 13.250581] emif_probe: error getting device data [ 13.250613] emif_probe: error getting device data [ 13.317575] emif_probe: error getting device data [ 13.317629] emif_probe: error getting device data [ 13.933623] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 14.035735] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 14.625597] asoc-simple-card sound_bluetooth: W2CBW003 <-> 40122000.mcbsp mapping ok [ 14.708568] asoc-simple-card sound_fmradio: W2CBW003 <-> 40124000.mcbsp mapping ok [ 14.915652] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 15.245937] wwan_on_off_rfkill_set_block: blocked: 0 [ 15.274660] wwan_on_off_set_power:on = 1 [ 15.282931] wwan_on_off_is_powered_on: gpio value = 0 [ 15.306931] snd_soc_omap_abe_twl6040: unknown parameter 'index' ignored [ 15.314032] wwan_on_off_is_powered_on: return 'false' [ 15.338564] wwan_on_off_set_power: state 0 [ 15.351841] asoc-simple-card sound_telephony: gtm601 <-> 40126000.mcbsp mapping ok [ 15.358444] wwan_on_off_set_power: regulator 0 [ 15.516269] omap-abe-twl6040 sound: ASoC: unknown pin AFML [ 15.561099] omap-abe-twl6040 sound: ASoC: unknown pin AFMR [ 15.585201] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok [ 15.764101] input: Letux Cortex 15 Headset Jack as /devices/platform/sound/sound/card4/input10 [ 15.815520] ehci-omap 4a064c00.ehci: port 2 reset error -110 [ 16.065472] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 [ 16.065485] wl18xx_driver wl18xx.2.auto: Falling back to sysfs fallback for: ti-connectivity/wl18xx-conf.bin [ 16.073489] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -11 [ 16.073489] wlcore: WARNING falling back to default config [ 16.474154] usb usb1-port2: Cannot enable. Maybe the USB cable is bad? [ 16.489352] usb usb1-port2: attempt power cycle [ 16.596308] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 16.616762] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. [ 16.634705] wlcore: WARNING This default nvs file can be removed from the file system [ 17.582425] wwan_on_off_set_power: send impulse [ 18.334292] wwan_on_off_is_powered_on: gpio value = 1 [ 18.365728] wwan_on_off_is_powered_on: return 'true' [ 18.397372] wwan_on_off_set_power: done [ 18.425875] wlcore: loaded [ 18.489199] input input2: as5013_open [ 18.489291] input input3: as5013_open [ 18.510705] input: pyraInput keyboard as /devices/virtual/input/input11 [ 18.511034] input: pyraInput Gamepad as /devices/virtual/input/input12 [ 18.511575] input: pyraInput Mouse as /devices/virtual/input/input13 [ 18.978732] wwan_on_off_rfkill_set_block: blocked: 0 [ 18.978742] wwan_on_off_set_power:on = 1 [ 18.978752] wwan_on_off_is_powered_on: gpio value = 1 [ 18.978758] wwan_on_off_is_powered_on: return 'true' [ 18.978762] wwan_on_off_set_power: state 1 [ 18.978762] wwan_on_off_set_power: regulator 1 [ 18.978762] wwan_on_off_set_power: done [ 19.162205] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.180694] Bluetooth: BNEP socket layer initialized [ 19.990389] wlcore: PHY firmware version: Rev 8.2.0.0.242 [ 20.094363] wlcore: firmware booted (Rev 8.9.0.0.79) [ 20.122452] wlcore: down [ 20.604922] wlcore: PHY firmware version: Rev 8.2.0.0.242 [ 20.713478] wlcore: firmware booted (Rev 8.9.0.0.79) [ 23.513515] fuse: init (API version 7.31) [ 25.192516] wlcore: down [ 29.286715] wlan0: authenticate with e0:22:04:22:8d:9a [ 29.306723] wlan0: send auth to e0:22:04:22:8d:9a (try 1/3) [ 29.343813] wlan0: authenticated [ 29.354189] wlan0: associate with e0:22:04:22:8d:9a (try 1/3) [ 29.364657] wlan0: RX AssocResp from e0:22:04:22:8d:9a (capab=0x511 status=0 aid=44) [ 29.393191] wlan0: associated [ 29.434817] wlan0: Limiting TX power to 127 (127 - 0) dBm as advertised by e0:22:04:22:8d:9a [ 29.649874] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 29.663668] wlcore: Association completed. [ 31.274048] Bluetooth: RFCOMM socket layer initialized [ 31.279482] Bluetooth: RFCOMM ver 1.11 [ 36.324068] host1_vbus_power: supplied by modem_vbus_hdmi_power [ 36.330691] host2_vbus_power: supplied by modem_vbus_hdmi_power [ 36.343142] ldo3: disabling [ 36.348544] ldo8: disabling [ 36.352804] otg_path: disabling [ 99.664950] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:e0:22:04:22:8d:91:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2