[ 0.000000] Linux version 3.2.30 (notaz@pixelinis) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #699 Tue Oct 16 03:07:33 EEST 2012 [ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Pandora Handheld Console [ 0.000000] Reserving 8388608 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 61952 [ 0.000000] free_area_init_node: node 0, pgdat c0512bf8, node_mem_map c0539000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 61440 pages, LIFO batch:15 [ 0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp ) [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61440 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 ro rootwait vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 242MB = 242MB total [ 0.000000] Memory: 240176k/240176k available, 21968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc04a63dc (4729 kB) [ 0.000000] .init : 0xc04a7000 - 0xc04d8000 ( 196 kB) [ 0.000000] .data : 0xc04d8000 - 0xc0513280 ( 237 kB) [ 0.000000] .bss : 0xc05132a4 - 0xc05384e4 ( 149 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000671] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504) [ 0.039123] pid_max: default: 32768 minimum: 301 [ 0.039489] Mount-cache hash table entries: 512 [ 0.040100] Initializing cgroup subsys devices [ 0.040161] CPU: Testing write buffer coherency: ok [ 0.040466] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.041564] devtmpfs: initialized [ 0.062927] print_constraints: dummy: [ 0.063507] NET: Registered protocol family 16 [ 0.063995] GPMC revision 5.0 [ 0.068328] OMAP GPIO hardware version 2.5 [ 0.073211] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.081817] Reprogramming SDRC clock to 332000000 Hz [ 0.084930] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.095184] omap-mcbsp.2: alias fck already exists [ 0.095672] omap-mcbsp.3: alias fck already exists [ 0.097686] OMAP DMA hardware revision 4.0 [ 0.120574] bio: create slab at 0 [ 0.122283] print_constraints: vwlan: 1800 mV [ 0.124511] SCSI subsystem initialized [ 0.128051] usbcore: registered new interface driver usbfs [ 0.128417] usbcore: registered new interface driver hub [ 0.128814] usbcore: registered new device driver usb [ 0.130737] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz [ 0.150421] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.150573] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.151336] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.151947] _omap_mux_init_gpio: Could not set gpio192 [ 0.153381] _omap_mux_init_gpio: Could not set gpio193 [ 0.156951] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.157867] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.158782] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.160827] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.162689] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal [ 0.163604] print_constraints: vdd_core: 600 <--> 1450 mV normal [ 0.164642] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 0.165618] print_constraints: VDAC: 1800 mV normal standby [ 0.166595] print_constraints: VAUX2: 1800 mV normal standby [ 0.167572] print_constraints: VPLL2: 1800 mV normal standby [ 0.168609] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby [ 0.169616] print_constraints: VSIM: 2800 mV normal standby [ 0.170562] print_constraints: VAUX1: 3000 mV normal standby [ 0.171478] print_constraints: VAUX4: 3000 mV normal standby [ 0.172271] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz [ 0.175842] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.177001] Switching to clocksource 32k_counter [ 0.209289] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.214752] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.214813] musb-hdrc: MHDRC RTL version 1.400 [ 0.214813] musb-hdrc: setup fifo_mode 4 [ 0.214843] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.215545] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.216705] NET: Registered protocol family 2 [ 0.216979] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.217407] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.217712] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.217926] TCP: Hash tables configured (established 8192 bind 8192) [ 0.217956] TCP reno registered [ 0.217987] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.218048] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.218444] NET: Registered protocol family 1 [ 0.218780] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.221221] omap_dsp_init: 600000 bytes @ 8f200000 [ 0.226531] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.246917] VFS: Disk quotas dquot_6.5.2 [ 0.247619] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.254486] msgmni has been set to 469 [ 0.257324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.257385] io scheduler noop registered [ 0.257415] io scheduler deadline registered [ 0.257476] io scheduler cfq registered (default) [ 0.272521] OMAP DSS rev 2.0 [ 0.276245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.279327] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.279968] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.280578] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 0.297515] brd: module loaded [ 0.306060] loop: module loaded [ 0.306152] OMAP overclocker loaded. [ 0.309265] omap2-nand driver initializing [ 0.309478] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit) [ 0.310211] Creating 5 MTD partitions on "omap2-nand.0": [ 0.310272] 0x000000000000-0x000000080000 : "xloader" [ 0.311309] 0x000000080000-0x000000260000 : "uboot" [ 0.312591] 0x000000260000-0x000000280000 : "uboot-env" [ 0.313476] 0x000000280000-0x000000c80000 : "boot" [ 0.316345] 0x000000c80000-0x000020000000 : "rootfs" [ 0.417480] usbcore: registered new interface driver libusual [ 0.418395] mousedev: PS/2 mouse device common for all mice [ 0.419189] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0 [ 0.422271] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 0.424072] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2 [ 0.425933] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3 [ 0.429931] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 0.430725] i2c /dev entries driver [ 0.435607] bq27x00-battery 3-0055: support ver. 1.2.0 enabled [ 0.456604] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 0.457214] twl4030_wdt twl4030_wdt: Failed to register misc device [ 0.457275] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 0.457946] voltdm_scale: No voltage scale API registered for vdd_mpu_iva [ 0.458007] platform mpu.0: omap_target: unable to scale voltage up. [ 0.458557] cpuidle: using governor ladder [ 0.458587] cpuidle: using governor menu [ 0.459259] omap_hsmmc omap_hsmmc.0: multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer [ 0.688354] Registered led device: pandora::sd1 [ 0.688659] Registered led device: pandora::sd2 [ 0.688964] Registered led device: pandora::bluetooth [ 0.689270] Registered led device: pandora::wifi [ 0.690612] Registered led device: pandora::keypad_bl [ 0.691528] Registered led device: pandora::power [ 0.694183] Registered led device: pandora::charger [ 0.695587] usbcore: registered new interface driver usbhid [ 0.695648] usbhid: USB HID core driver [ 0.698272] OMAP3 Pandora SoC init [ 0.782928] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok [ 0.784423] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok [ 0.787353] ALSA device list: [ 0.787414] #0: omap3pandora [ 0.787628] TCP cubic registered [ 0.787658] NET: Registered protocol family 17 [ 0.787750] NET: Registered protocol family 15 [ 0.787780] Registering the dns_resolver key type [ 0.787872] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.787933] ThumbEE CPU extension supported. [ 0.787994] Registering SWP/SWPB emulation handler [ 0.791717] PM: no software I/O chain control; some wakeups may be lost [ 0.795989] clock: disabling unused clocks to save power [ 0.828216] Console: switching to colour frame buffer device 100x30 [ 1.020172] input: gpio-keys as /devices/platform/gpio-keys/input/input4 [ 1.026184] twl_rtc twl_rtc: setting system clock to 2013-02-22 20:36:18 UTC (1361565378) [ 1.030609] Waiting for root device /dev/mmcblk0p1... [ 1.051452] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.059295] mmc0: new high speed SDHC card at address e624 [ 1.063995] mmcblk0: mmc0:e624 SU16G 14.8 GiB [ 1.076080] mmcblk0: p1 p2 [ 1.149291] VFS: Mounted root (ext2 filesystem) readonly on device 179:1. [ 1.155273] devtmpfs: mounted [ 1.159545] Freeing init memory: 196K [ 1.385345] mmc1: host does not support reading read-only switch. assuming write-enable. [ 1.392547] mmc1: new high speed SDHC card at address b368 [ 1.408111] mmcblk1: mmc1:b368 LEXAR 29.8 GiB [ 1.415252] mmcblk1: p1 [ 1.518280] mmc2: card claims to support voltages below the defined range. These will be ignored. [ 1.525665] mmc2: new SDIO card at address 0001 [ 1.996978] udevd[693]: starting version 182 [ 3.310424] ads7846 spi1.0: touchscreen, irq 254 [ 3.332153] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5 [ 3.960968] cfg80211: Calling CRDA to update world regulatory domain [ 6.313140] cfg80211: World regulatory domain updated: [ 6.317535] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.322052] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.326507] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.330780] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.335083] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.339263] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.457763] Adding 262140k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:262140k SS [ 6.532501] fuse init (API version 7.17) [ 19.178588] Bluetooth: Core ver 2.16 [ 19.193847] NET: Registered protocol family 31 [ 19.193878] Bluetooth: HCI device and connection manager initialized [ 19.193908] Bluetooth: HCI socket layer initialized [ 19.193908] Bluetooth: L2CAP socket layer initialized [ 19.193969] Bluetooth: SCO socket layer initialized [ 19.305419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.305419] Bluetooth: BNEP filters: protocol multicast [ 20.707519] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 20.711364] zram: num_devices not specified. Using default: 1 [ 20.711395] zram: Creating 1 devices ... [ 20.866455] Adding 65532k swap on /dev/zram0. Priority:5 extents:1 across:65532k SS [ 21.763305] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6 [ 21.849456] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7 [ 22.778869] SGX clock rate 110 MHz [ 24.041259] NET: Registered protocol family 10 [ 54.768646] Bluetooth: RFCOMM TTY layer initialized [ 54.768707] Bluetooth: RFCOMM socket layer initialized [ 54.768737] Bluetooth: RFCOMM ver 1.11 [ 72.849822] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 73.155914] aufs 3.2-20120109 [ 73.158416] aufs test_add:261:mount[1872]: uid/gid/perm /mnt/pnd/muon 1000/1000/0777, 1000/100/0700